This is the latest recevied telemetry packets stored in our database for station/object OE9DGV-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274521 | 16.1 deg C | 79.4 % | 1023 hPa | 0 | 0 |
| 1836274370 | 16.3 deg C | 79.2 % | 1022.9 hPa | 0 | 0 |
| 1762336657 | 6.2 deg C | 89.7 % | 1022.9 hPa | 0 | 0 |
| 1762334864 | 4.7 deg C | 90.7 % | 1023.2 hPa | 0 | 0 |
| 1762333064 | 4.4 deg C | 92.3 % | 1023.5 hPa | 0 | 0 |
| 1762332164 | 4 deg C | 92.1 % | 1023.7 hPa | 0 | 0 |
| 1762330372 | 3.8 deg C | 91.5 % | 1024.2 hPa | 0 | 0 |
| 1762328572 | 3.8 deg C | 90.9 % | 1024.2 hPa | 0 | 0 |
| 1762327673 | 3.9 deg C | 91.5 % | 1024.2 hPa | 0 | 0 |
| 1762326778 | 3.9 deg C | 92.1 % | 1024.3 hPa | 0 | 0 |
| 1762325876 | 3.8 deg C | 91.9 % | 1024.5 hPa | 0 | 0 |
| 1762324972 | 3.7 deg C | 92.1 % | 1024.5 hPa | 0 | 0 |
| 1762324072 | 3.5 deg C | 91.5 % | 1024.8 hPa | 0 | 0 |
| 1762322263 | 3.7 deg C | 92.3 % | 1024.4 hPa | 0 | 0 |
| 1762321364 | 3.7 deg C | 91.9 % | 1024.8 hPa | 0 | 0 |
| 1762319558 | 3.8 deg C | 91.2 % | 1024.8 hPa | 0 | 0 |
| 1762318663 | 4 deg C | 91.3 % | 1024.9 hPa | 0 | 0 |
| 1762317764 | 4.1 deg C | 90.4 % | 1025.2 hPa | 0 | 0 |
| 1762316863 | 4.6 deg C | 91.1 % | 1025.2 hPa | 0 | 0 |
| 1762315961 | 4.9 deg C | 91.4 % | 1025 hPa | 0 | 0 |
| 1762315057 | 4.4 deg C | 92 % | 1025.3 hPa | 0 | 0 |
| 1762313262 | 4 deg C | 90 % | 1025.6 hPa | 0 | 0 |
| 1762312365 | 4.2 deg C | 90.5 % | 1025.5 hPa | 0 | 0 |
| 1762311466 | 4.4 deg C | 90.9 % | 1025.5 hPa | 0 | 0 |
| 1762309674 | 4.4 deg C | 90 % | 1025.5 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)