APRS Track Direct

My position About ☰

reset

SP4SKD-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP4SKD-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1791731830	984.7 hPa	23.4 C deg	39 %	1006.5 hPa	0 C deg
1791730000	984.2 hPa	23.9 C deg	39 %	1006 hPa	0 C deg
1791728170	984.2 hPa	24.2 C deg	38.3 %	1005.9 hPa	0 C deg
1791726340	983.9 hPa	24.2 C deg	37.8 %	1005.6 hPa	0 C deg
1791724510	984 hPa	24.4 C deg	38.6 %	1005.7 hPa	0 C deg
1791722680	984.1 hPa	23.6 C deg	38.9 %	1005.8 hPa	0 C deg
1791720850	983.9 hPa	24 C deg	38.7 %	1005.6 hPa	0 C deg
1791719020	984 hPa	24.4 C deg	39.1 %	1005.6 hPa	0 C deg
1791717190	983.8 hPa	24.9 C deg	39.5 %	1005.4 hPa	0 C deg
1791713530	984 hPa	24.8 C deg	40.1 %	1005.7 hPa	0 C deg
1791711700	984.2 hPa	24.5 C deg	40.6 %	1005.8 hPa	0 C deg
1791709870	984.5 hPa	24.4 C deg	41.4 %	1006.2 hPa	0 C deg
1791708040	984.2 hPa	24.2 C deg	40.2 %	1005.9 hPa	0 C deg
1791706210	984.3 hPa	24.6 C deg	39.6 %	1006 hPa	0 C deg
1791704524	984.2 hPa	24.3 C deg	39.6 %	1005.9 hPa	0 C deg
1791702694	984.4 hPa	24.4 C deg	39.7 %	1006.1 hPa	0 C deg
1791700864	984.5 hPa	24.5 C deg	39.9 %	1006.1 hPa	0 C deg
1791699034	984.3 hPa	24.4 C deg	39.7 %	1006 hPa	0 C deg
1791697204	984.4 hPa	24.5 C deg	40 %	1006.1 hPa	0 C deg
1791695374	984.4 hPa	24.4 C deg	40 %	1006.1 hPa	0 C deg
1791693544	984.5 hPa	24.2 C deg	40.1 %	1006.2 hPa	0 C deg
1791691714	984.6 hPa	24 C deg	40.1 %	1006.3 hPa	0 C deg
1791689884	984.8 hPa	23.7 C deg	40.3 %	1006.6 hPa	0 C deg
1791688054	984.9 hPa	23.8 C deg	40.2 %	1006.6 hPa	0 C deg
1791686223	984.9 hPa	23.9 C deg	40.1 %	1006.6 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)