APRS Track Direct

My position About ☰

reset

SQ8MAE-5 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SQ8MAE-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Vin*	Rx10m*	Rx1h*	Eff1h*	Eff*
1732207535	14.25 Volt	5 Pkt	0 Pkt	60 Pcnt	78 Pcnt
1732206333	14.25 Volt	0 Pkt	0 Pkt	100 Pcnt	79 Pcnt
1732205733	14.25 Volt	0 Pkt	0 Pkt	100 Pcnt	79 Pcnt
1732205132	14.25 Volt	0 Pkt	0 Pkt	100 Pcnt	79 Pcnt
1732203931	14.25 Volt	0 Pkt	10 Pkt	86 Pcnt	79 Pcnt
1732203331	14.25 Volt	0 Pkt	20 Pkt	77 Pcnt	79 Pcnt
1732202730	14.25 Volt	0 Pkt	20 Pkt	77 Pcnt	79 Pcnt
1732202129	14.18 Volt	4 Pkt	40 Pkt	80 Pcnt	79 Pcnt
1732201529	14.25 Volt	0 Pkt	30 Pkt	78 Pcnt	79 Pcnt
1732200928	14.25 Volt	15 Pkt	30 Pkt	78 Pcnt	79 Pcnt
1732199727	14.25 Volt	0 Pkt	10 Pkt	82 Pcnt	80 Pcnt
1732199127	14.25 Volt	19 Pkt	10 Pkt	82 Pcnt	80 Pcnt
1732198526	14.4 Volt	0 Pkt	0 Pkt	100 Pcnt	79 Pcnt
1732197926	14.25 Volt	0 Pkt	0 Pkt	87 Pcnt	79 Pcnt
1732196725	14.25 Volt	0 Pkt	10 Pkt	64 Pcnt	79 Pcnt
1732196124	14.25 Volt	0 Pkt	10 Pkt	64 Pcnt	79 Pcnt
1732194923	14.25 Volt	6 Pkt	10 Pkt	62 Pcnt	79 Pcnt
1732194322	14.25 Volt	1 Pkt	0 Pkt	52 Pcnt	78 Pcnt
1732192521	14.25 Volt	0 Pkt	0 Pkt	100 Pcnt	86 Pcnt
1732191920	14.25 Volt	0 Pkt	10 Pkt	91 Pcnt	86 Pcnt
1732191319	14.25 Volt	0 Pkt	10 Pkt	92 Pcnt	86 Pcnt
1732190719	14.25 Volt	0 Pkt	20 Pkt	95 Pcnt	86 Pcnt
1732190118	14.25 Volt	0 Pkt	20 Pkt	96 Pcnt	86 Pcnt
1732189518	14.25 Volt	0 Pkt	20 Pkt	90 Pcnt	86 Pcnt
1732187716	14.18 Volt	8 Pkt	10 Pkt	88 Pcnt	84 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Eff1h: 0, 1, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)