This is the latest recevied telemetry packets stored in our database for station/object KA7EZO-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | Tempf* | A3* | A4* | A5* |
|---|---|---|---|---|---|
| 1791993306 | 13.2 Volt | 6.5 F | 0 None | 0 None | 0 None |
| 1791991506 | 12.83 Volt | 6.5 F | 0 None | 0 None | 0 None |
| 1791989706 | 13.05 Volt | 6.5 F | 0 None | 0 None | 0 None |
| 1791987907 | 13.05 Volt | 6.5 F | 0 None | 0 None | 0 None |
| 1791986107 | 13.13 Volt | 6.5 F | 0 None | 0 None | 0 None |
| 1791984307 | 13.13 Volt | 6.5 F | 0 None | 0 None | 0 None |
| 1791982507 | 13.2 Volt | 6.5 F | 0 None | 0 None | 0 None |
| 1791980707 | 12.9 Volt | 6.5 F | 0 None | 0 None | 0 None |
| 1791978907 | 13.13 Volt | 6.5 F | 0 None | 0 None | 0 None |
| 1791977107 | 12.98 Volt | 7 F | 0 None | 0 None | 0 None |
| 1791975307 | 12.75 Volt | 7 F | 0 None | 0 None | 0 None |
| 1791973507 | 13.13 Volt | 7 F | 0 None | 0 None | 0 None |
| 1791971707 | 13.05 Volt | 7 F | 0 None | 0 None | 0 None |
| 1791969907 | 13.13 Volt | 7 F | 0 None | 0 None | 0 None |
| 1791968107 | 13.2 Volt | 7.5 F | 0 None | 0 None | 0 None |
| 1791966307 | 13.13 Volt | 7.5 F | 0 None | 0 None | 0 None |
| 1791964507 | 13.2 Volt | 7.5 F | 0 None | 0 None | 0 None |
| 1791962708 | 12.98 Volt | 7.5 F | 0 None | 0 None | 0 None |
| 1791960908 | 13.13 Volt | 8 F | 0 None | 0 None | 0 None |
| 1791959108 | 13.13 Volt | 8 F | 0 None | 0 None | 0 None |
| 1791957308 | 12.9 Volt | 8.5 F | 0 None | 0 None | 0 None |
| 1791955508 | 12.98 Volt | 8.5 F | 0 None | 0 None | 0 None |
| 1791953708 | 12.98 Volt | 9 F | 0 None | 0 None | 0 None |
| 1791951908 | 12.98 Volt | 9 F | 0 None | 0 None | 0 None |
| 1791950108 | 12.98 Volt | 9.5 F | 0 None | 0 None | 0 None |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Tempf: 0, 0.5, -64
A3: 0, 0, 0
A4: 0, 0, 0
A5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)