This is the latest recevied telemetry packets stored in our database for station/object DB0KR-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786734435 | 34.8 deg C | 18.6 % | 1013 hPa | 0 | 0 |
| 1786733534 | 35.7 deg C | 18.1 % | 1012.8 hPa | 0 | 0 |
| 1786732634 | 36.6 deg C | 17.6 % | 1012.6 hPa | 0 | 0 |
| 1786731734 | 36.8 deg C | 17.7 % | 1012.7 hPa | 0 | 0 |
| 1786730834 | 36.6 deg C | 17.8 % | 1012.6 hPa | 0 | 0 |
| 1786729934 | 36.3 deg C | 18.1 % | 1012.6 hPa | 0 | 0 |
| 1786729034 | 35.9 deg C | 18.3 % | 1012.8 hPa | 0 | 0 |
| 1786728134 | 36.2 deg C | 18.2 % | 1012.9 hPa | 0 | 0 |
| 1786727234 | 36.5 deg C | 18 % | 1012.8 hPa | 0 | 0 |
| 1786726334 | 36.8 deg C | 17.7 % | 1012.8 hPa | 0 | 0 |
| 1786725434 | 37.1 deg C | 17.6 % | 1012.9 hPa | 0 | 0 |
| 1786724534 | 37.6 deg C | 17.4 % | 1012.8 hPa | 0 | 0 |
| 1786723634 | 37.8 deg C | 17.3 % | 1012.9 hPa | 0 | 0 |
| 1786722734 | 38.1 deg C | 17.1 % | 1013 hPa | 0 | 0 |
| 1786721833 | 38.6 deg C | 17.2 % | 1013.1 hPa | 0 | 0 |
| 1786720933 | 38.8 deg C | 17 % | 1013.2 hPa | 0 | 0 |
| 1786720033 | 39.3 deg C | 16.9 % | 1013.2 hPa | 0 | 0 |
| 1786719133 | 39.5 deg C | 17.1 % | 1013.3 hPa | 0 | 0 |
| 1786718233 | 39.7 deg C | 17.1 % | 1013.5 hPa | 0 | 0 |
| 1786717333 | 39.8 deg C | 17.1 % | 1013.7 hPa | 0 | 0 |
| 1786716433 | 40.1 deg C | 16.8 % | 1013.9 hPa | 0 | 0 |
| 1786715533 | 40.5 deg C | 17 % | 1013.9 hPa | 0 | 0 |
| 1786714633 | 40.5 deg C | 16.9 % | 1014 hPa | 0 | 0 |
| 1786713733 | 40.7 deg C | 16.7 % | 1014.2 hPa | 0 | 0 |
| 1786712833 | 41.1 deg C | 16.4 % | 1014.3 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)