This is the latest recevied telemetry packets stored in our database for station/object F1CJN-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1791706347 | 3.02 | 0 | 0 | 0 | 0 |
| 1791706324 | 3.03 | 0 | 0 | 0 | 0 |
| 1791706213 | 3.05 | 0 | 0 | 0 | 0 |
| 1791706190 | 3.06 | 0 | 0 | 0 | 0 |
| 1791705575 | 3.15 | 0 | 0 | 0 | 0 |
| 1791705353 | 3.18 | 0 | 0 | 0 | 0 |
| 1791705215 | 3.19 | 0 | 0 | 0 | 0 |
| 1791705099 | 3.21 | 0 | 0 | 0 | 0 |
| 1791704974 | 3.22 | 0 | 0 | 0 | 0 |
| 1791704917 | 3.23 | 0 | 0 | 0 | 0 |
| 1791704848 | 3.23 | 0 | 0 | 0 | 0 |
| 1791704808 | 3.24 | 0 | 0 | 0 | 0 |
| 1791704512 | 3.27 | 0 | 0 | 0 | 0 |
| 1791704485 | 3.27 | 0 | 0 | 0 | 0 |
| 1791704427 | 3.27 | 0 | 0 | 0 | 0 |
| 1791704404 | 3.27 | 0 | 0 | 0 | 0 |
| 1791704352 | 3.28 | 0 | 0 | 0 | 0 |
| 1791704294 | 3.28 | 0 | 0 | 0 | 0 |
| 1791703656 | 3.33 | 0 | 0 | 0 | 0 |
| 1791703633 | 3.33 | 0 | 0 | 0 | 0 |
| 1791703609 | 3.33 | 0 | 0 | 0 | 0 |
| 1791703521 | 3.34 | 0 | 0 | 0 | 0 |
| 1791703243 | 3.36 | 0 | 0 | 0 | 0 |
| 1791703220 | 3.36 | 0 | 0 | 0 | 0 |
| 1791703193 | 3.36 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)