This is the latest recevied telemetry packets stored in our database for station/object WD5EMA-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Batt* | Curr* | SoC* | CPU* | Power* |
|---|---|---|---|---|---|
| 1794912723 | 12.34 Volts | -0.4 Amps | 11 % | 27.5 degC | -5.2 Watts |
| 1794912123 | 12.38 Volts | -0.4 Amps | 12 % | 27.5 degC | -5.2 Watts |
| 1794911524 | 12.46 Volts | -0.4 Amps | 13 % | 27.5 degC | -5.2 Watts |
| 1794910924 | 12.48 Volts | -0.4 Amps | 14 % | 27.5 degC | -5.2 Watts |
| 1794910324 | 12.48 Volts | -0.4 Amps | 14 % | 27.5 degC | -5.2 Watts |
| 1794909724 | 12.5 Volts | -0.4 Amps | 16 % | 27 degC | -5.2 Watts |
*Used Equation Coefficients:
Batt: 0, 0.02, 10
Curr: 0, 0.04, -5
SoC: 0, 1, 0
CPU: 0, 0.5, 0
Power: 0, 0.6, -70
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)