This is the latest recevied telemetry packets stored in our database for station/object CALGRY. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Rx1h* | Dg10m* | Shack* | VDC* | VAC* |
|---|---|---|---|---|---|
| 1731478113 | 210 Pkt | 25 Pkt | 11 C | 13.3 Volts | 125.4 Volts |
| 1731477453 | 210 Pkt | 25 Pkt | 10.5 C | 13.3 Volts | 125.4 Volts |
| 1731476793 | 200 Pkt | 17 Pkt | 11 C | 13.3 Volts | 125.4 Volts |
| 1731476133 | 190 Pkt | 17 Pkt | 11 C | 13.3 Volts | 125.4 Volts |
| 1731475473 | 210 Pkt | 21 Pkt | 11 C | 13.3 Volts | 124.45 Volts |
| 1731474813 | 220 Pkt | 19 Pkt | 11 C | 13.3 Volts | 124.45 Volts |
| 1731474153 | 230 Pkt | 17 Pkt | 11 C | 13.3 Volts | 125.4 Volts |
| 1731473493 | 240 Pkt | 16 Pkt | 11 C | 13.3 Volts | 125.4 Volts |
| 1731472833 | 250 Pkt | 13 Pkt | 11 C | 13.3 Volts | 125.4 Volts |
| 1731472173 | 260 Pkt | 43 Pkt | 11 C | 13.3 Volts | 125.4 Volts |
| 1731471513 | 210 Pkt | 19 Pkt | 11 C | 13.3 Volts | 124.45 Volts |
| 1731470853 | 200 Pkt | 24 Pkt | 11 C | 13.3 Volts | 124.45 Volts |
| 1731470193 | 190 Pkt | 19 Pkt | 11 C | 13.3 Volts | 124.45 Volts |
| 1731469533 | 170 Pkt | 17 Pkt | 11 C | 13.3 Volts | 125.4 Volts |
| 1731468873 | 160 Pkt | 13 Pkt | 11 C | 13.3 Volts | 125.4 Volts |
| 1731468213 | 160 Pkt | 11 Pkt | 11 C | 13.3 Volts | 124.45 Volts |
| 1731467553 | 180 Pkt | 18 Pkt | 11 C | 13.3 Volts | 124.45 Volts |
| 1731466893 | 220 Pkt | 16 Pkt | 11 C | 13.3 Volts | 124.45 Volts |
| 1731466233 | 250 Pkt | 14 Pkt | 11 C | 13.3 Volts | 124.45 Volts |
| 1731465573 | 250 Pkt | 19 Pkt | 11 C | 13.3 Volts | 124.45 Volts |
| 1731464913 | 260 Pkt | 18 Pkt | 11 C | 13.3 Volts | 124.45 Volts |
| 1731464253 | 260 Pkt | 41 Pkt | 11 C | 13.3 Volts | 124.45 Volts |
*Used Equation Coefficients:
Rx1h: 0, 10, 0
Dg10m: 0, 1, 0
Shack: 0, 0.5, -64
VDC: 0, 0.1, 0
VAC: 0, 0.95, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)