This is the latest recevied telemetry packets stored in our database for station/object ED4ZAA-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | Rx1h* | Dg1h* | Eff1h* | Temp* |
|---|---|---|---|---|---|
| 1786730434 | 12.75 Volt | 120 Pkt | 90 Pkt | 76 Pcnt | -62 ºC |
| 1786726830 | 12.9 Volt | 100 Pkt | 80 Pkt | 59 Pcnt | -62 ºC |
| 1786723227 | 13.65 Volt | 130 Pkt | 100 Pkt | 56 Pcnt | -62 ºC |
| 1786719623 | 13.73 Volt | 180 Pkt | 140 Pkt | 57 Pcnt | -62 ºC |
| 1786716020 | 13.8 Volt | 120 Pkt | 80 Pkt | 85 Pcnt | -62 ºC |
| 1786712416 | 14.03 Volt | 150 Pkt | 120 Pkt | 90 Pcnt | -62 ºC |
| 1786708813 | 14.1 Volt | 160 Pkt | 120 Pkt | 73 Pcnt | -62 ºC |
| 1786705209 | 14.25 Volt | 150 Pkt | 110 Pkt | 56 Pcnt | -62 ºC |
| 1786701606 | 13.43 Volt | 150 Pkt | 120 Pkt | 45 Pcnt | -62 ºC |
| 1786694399 | 14.33 Volt | 180 Pkt | 120 Pkt | 55 Pcnt | -62 ºC |
| 1786690795 | 13.5 Volt | 110 Pkt | 80 Pkt | 48 Pcnt | -62 ºC |
| 1786687192 | 12.75 Volt | 110 Pkt | 80 Pkt | 62 Pcnt | -62 ºC |
| 1786683588 | 12.6 Volt | 100 Pkt | 80 Pkt | 56 Pcnt | -62 ºC |
| 1786679985 | 12.68 Volt | 90 Pkt | 80 Pkt | 81 Pcnt | -62 ºC |
| 1786676381 | 12.68 Volt | 90 Pkt | 80 Pkt | 79 Pcnt | -62 ºC |
| 1786672778 | 12.68 Volt | 110 Pkt | 80 Pkt | 58 Pcnt | -62 ºC |
| 1786669174 | 12.68 Volt | 100 Pkt | 80 Pkt | 54 Pcnt | -62 ºC |
| 1786665571 | 12.68 Volt | 120 Pkt | 90 Pkt | 59 Pcnt | -62 ºC |
| 1786661967 | 12.75 Volt | 110 Pkt | 70 Pkt | 53 Pcnt | -62 ºC |
| 1786658364 | 12.75 Volt | 110 Pkt | 80 Pkt | 56 Pcnt | -62 ºC |
| 1786654760 | 12.75 Volt | 150 Pkt | 100 Pkt | 66 Pcnt | -62 ºC |
| 1786651157 | 12.75 Volt | 100 Pkt | 70 Pkt | 59 Pcnt | -62 ºC |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
Temp: 0, 0.5, -62
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)