This is the latest recevied telemetry packets stored in our database for station/object DO1DW-73. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | eGAS* | Temp.out* |
|---|---|---|---|---|---|
| 1792001328 | 979.7 hPa | 20.8 C deg | 50.5 % | 83 - | 0 C deg |
| 1791995877 | 994.1 hPa | 22 C deg | 48.6 % | 78 - | 0 C deg |
| 1791994023 | 994.3 hPa | 22.7 C deg | 48.9 % | 76 - | 0 C deg |
| 1791992195 | 999.8 hPa | 23 C deg | 49.2 % | 78 - | 0 C deg |
| 1791990357 | 998.8 hPa | 23.2 C deg | 52 % | 70 - | 0 C deg |
| 1791988528 | 997.1 hPa | 23.2 C deg | 58.4 % | 64 - | 0 C deg |
| 1791986696 | 997.2 hPa | 23.3 C deg | 59.1 % | 62 - | 0 C deg |
| 1791981210 | 997.6 hPa | 22.8 C deg | 57.2 % | 65 - | 0 C deg |
| 1791979374 | 997.8 hPa | 23.3 C deg | 55.2 % | 66 - | 0 C deg |
| 1791977542 | 998.1 hPa | 23.1 C deg | 53.9 % | 68 - | 0 C deg |
| 1791975712 | 998.3 hPa | 22.8 C deg | 53.5 % | 68 - | 0 C deg |
| 1791972049 | 998.5 hPa | 17.9 C deg | 68.7 % | 70 - | 0 C deg |
| 1791966558 | 997.9 hPa | 16 C deg | 69.2 % | 79 - | 0 C deg |
| 1791964726 | 997.5 hPa | 15.6 C deg | 67.7 % | 83 - | 0 C deg |
| 1791962895 | 997.5 hPa | 15.2 C deg | 67.8 % | 84 - | 0 C deg |
| 1791961064 | 997 hPa | 15.3 C deg | 64.5 % | 88 - | 0 C deg |
| 1791959235 | 996.9 hPa | 15.5 C deg | 64.4 % | 87 - | 0 C deg |
| 1791957405 | 996.5 hPa | 15.9 C deg | 64.9 % | 85 - | 0 C deg |
| 1791955572 | 996.3 hPa | 16.4 C deg | 65.8 % | 82 - | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
eGAS: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)