This is the latest recevied telemetry packets stored in our database for station/object OE9DGV. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1790642933 | 15.8 deg C | 75.9 % | 1020.2 hPa | 0 | 0 |
| 1790642032 | 15.9 deg C | 75 % | 1019.9 hPa | 0 | 0 |
| 1790641132 | 16 deg C | 74.6 % | 1020 hPa | 0 | 0 |
| 1790640232 | 16.3 deg C | 73.2 % | 1019.8 hPa | 0 | 0 |
| 1790639332 | 16.1 deg C | 74.3 % | 1019.9 hPa | 0 | 0 |
| 1790638432 | 16.1 deg C | 74.3 % | 1019.9 hPa | 0 | 0 |
| 1790637532 | 16.5 deg C | 72.7 % | 1019.7 hPa | 0 | 0 |
| 1790636632 | 16.3 deg C | 74.8 % | 1019.8 hPa | 0 | 0 |
| 1790635732 | 17.3 deg C | 69.2 % | 1019.6 hPa | 0 | 0 |
| 1790634832 | 17.4 deg C | 69.1 % | 1019.5 hPa | 0 | 0 |
| 1790633932 | 17 deg C | 71.2 % | 1019.7 hPa | 0 | 0 |
| 1790633031 | 17.2 deg C | 71 % | 1019.6 hPa | 0 | 0 |
| 1790632131 | 16.9 deg C | 72.4 % | 1019.7 hPa | 0 | 0 |
| 1790631231 | 17.4 deg C | 70.8 % | 1019.5 hPa | 0 | 0 |
| 1790630331 | 16.9 deg C | 73.5 % | 1019.7 hPa | 0 | 0 |
| 1790629431 | 17.4 deg C | 71.2 % | 1019.5 hPa | 0 | 0 |
| 1790628532 | 17.7 deg C | 70.3 % | 1019.3 hPa | 0 | 0 |
| 1790627631 | 17.4 deg C | 72 % | 1019.5 hPa | 0 | 0 |
| 1790626733 | 17.5 deg C | 72 % | 1019.5 hPa | 0 | 0 |
| 1790625831 | 17.9 deg C | 70.2 % | 1019.3 hPa | 0 | 0 |
| 1790624931 | 18.6 deg C | 68 % | 1019.1 hPa | 0 | 0 |
| 1790624031 | 19 deg C | 64.5 % | 1019 hPa | 0 | 0 |
| 1790623131 | 18.7 deg C | 66.1 % | 1019.1 hPa | 0 | 0 |
| 1790622231 | 20.9 deg C | 58.7 % | 1018.6 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)