APRS Track Direct

My position About ☰

reset

YM3KD-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YM3KD-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1758208148	16 Pkt	27 Pkt	3 Pkt	-32 dBm	13.49 V
1758207187	22 Pkt	40 Pkt	5 Pkt	-36 dBm	13.54 V
1758206208	19 Pkt	48 Pkt	1 Pkt	-29 dBm	13.49 V
1758205222	15 Pkt	45 Pkt	2 Pkt	-34 dBm	13.49 V
1758204238	11 Pkt	47 Pkt	2 Pkt	-35 dBm	13.54 V
1758203255	22 Pkt	53 Pkt	0 Pkt	-38 dBm	13.49 V
1758202267	14 Pkt	49 Pkt	1 Pkt	-36 dBm	13.49 V
1758201277	16 Pkt	67 Pkt	1 Pkt	-38 dBm	13.49 V
1758200272	19 Pkt	53 Pkt	2 Pkt	-35 dBm	13.49 V
1758200271	19 Pkt	53 Pkt	2 Pkt	-39 dBm	13.49 V
1758199278	17 Pkt	53 Pkt	4 Pkt	-40 dBm	13.49 V
1758198285	14 Pkt	63 Pkt	2 Pkt	-39 dBm	13.49 V
1758198285	14 Pkt	63 Pkt	2 Pkt	-34 dBm	13.49 V
1758197285	12 Pkt	64 Pkt	1 Pkt	-38 dBm	13.54 V
1758197285	12 Pkt	64 Pkt	1 Pkt	-35 dBm	13.54 V
1758196280	12 Pkt	56 Pkt	1 Pkt	-40 dBm	13.49 V
1758196280	12 Pkt	56 Pkt	1 Pkt	-32 dBm	13.49 V
1758195283	11 Pkt	48 Pkt	5 Pkt	-31 dBm	13.54 V
1758194295	19 Pkt	51 Pkt	1 Pkt	-34 dBm	13.54 V
1758193304	9 Pkt	51 Pkt	4 Pkt	-37 dBm	13.49 V
1758193304	9 Pkt	51 Pkt	4 Pkt	-34 dBm	13.49 V
1758192315	20 Pkt	46 Pkt	5 Pkt	-36 dBm	13.49 V
1758192315	20 Pkt	46 Pkt	5 Pkt	-34 dBm	13.49 V
1758191335	17 Pkt	50 Pkt	6 Pkt	-40 dBm	13.54 V
1758191335	17 Pkt	50 Pkt	6 Pkt	-31 dBm	13.54 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)