This is the latest recevied telemetry packets stored in our database for station/object EA6ADB-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Sate* | Temp* | Volt* | Alt* | A5* |
|---|---|---|---|---|---|
| 1753682349 | 6 | 35.3 C | 3.68 V | 520 M | 0 |
| 1753682231 | 6 | 35.6 C | 3.68 V | 520 M | 0 |
| 1753678382 | 6 | 35.8 C | 3.71 V | 510 M | 0 |
| 1753678182 | 7 | 35.3 C | 3.71 V | 470 M | 0 |
| 1753676604 | 7 | 35.1 C | 3.72 V | 480 M | 0 |
| 1753676182 | 5 | 33.7 C | 3.72 V | 570 M | 0 |
| 1753676130 | 5 | 34.1 C | 3.72 V | 550 M | 0 |
| 1753675976 | 5 | 33.7 C | 3.72 V | 570 M | 0 |
| 1753674917 | 5 | 30.1 C | 3.73 V | 590 M | 0 |
| 1753674817 | 6 | 29.6 C | 3.73 V | 600 M | 0 |
| 1753674717 | 7 | 29.3 C | 3.73 V | 460 M | 0 |
| 1753674667 | 6 | 29.1 C | 3.73 V | 390 M | 0 |
| 1753674567 | 7 | 28.6 C | 3.73 V | 370 M | 0 |
| 1753674467 | 7 | 28 C | 3.73 V | 340 M | 0 |
| 1753674421 | 6 | 27.6 C | 3.74 V | 340 M | 0 |
| 1753674367 | 5 | 27 C | 3.74 V | 330 M | 0 |
| 1753674300 | 7 | 26.1 C | 3.74 V | 330 M | 0 |
*Used Equation Coefficients:
Sate: 0, 1, 0
Temp: 0, 0.1, -50
Volt: 0, 0.01, 0
Alt: 0, 10, 0
A5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)