This is the latest recevied telemetry packets stored in our database for station/object HS2KYA-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | SUN* |
|---|---|---|---|---|---|
| 1790667518 | 0 Pkt | 43 Pkt | 0 Pkt | -61 dBm | 0 % |
| 1790666269 | 0 Pkt | 56 Pkt | 0 Pkt | -61 dBm | 0 % |
| 1790665007 | 0 Pkt | 61 Pkt | 0 Pkt | -61 dBm | 0 % |
| 1790663743 | 0 Pkt | 68 Pkt | 0 Pkt | -62 dBm | 0 % |
| 1790662471 | 0 Pkt | 87 Pkt | 0 Pkt | -61 dBm | 0 % |
| 1790661186 | 0 Pkt | 65 Pkt | 0 Pkt | -60 dBm | 0 % |
| 1790659920 | 0 Pkt | 52 Pkt | 0 Pkt | -61 dBm | 0 % |
| 1790658663 | 0 Pkt | 67 Pkt | 0 Pkt | -61 dBm | 0 % |
| 1790657393 | 0 Pkt | 44 Pkt | 0 Pkt | -62 dBm | 0 % |
| 1790656146 | 0 Pkt | 51 Pkt | 0 Pkt | -60 dBm | 0 % |
| 1790654888 | 0 Pkt | 41 Pkt | 0 Pkt | -62 dBm | 0 % |
| 1790653637 | 0 Pkt | 39 Pkt | 0 Pkt | -60 dBm | 0 % |
| 1790652391 | 0 Pkt | 40 Pkt | 0 Pkt | -60 dBm | 0 % |
| 1790651143 | 0 Pkt | 36 Pkt | 0 Pkt | -60 dBm | 0 % |
| 1790649898 | 0 Pkt | 40 Pkt | 0 Pkt | -59 dBm | 0 % |
| 1790648649 | 0 Pkt | 40 Pkt | 0 Pkt | -60 dBm | 0 % |
| 1790647402 | 0 Pkt | 36 Pkt | 0 Pkt | -60 dBm | 0 % |
| 1790646160 | 0 Pkt | 36 Pkt | 0 Pkt | -59 dBm | 0 % |
| 1790644917 | 0 Pkt | 41 Pkt | 0 Pkt | -60 dBm | 0 % |
| 1790643668 | 0 Pkt | 39 Pkt | 0 Pkt | -60 dBm | 0 % |
| 1790642421 | 0 Pkt | 38 Pkt | 0 Pkt | -60 dBm | 0 % |
| 1790641176 | 0 Pkt | 37 Pkt | 0 Pkt | -60 dBm | 0 % |
| 1790639930 | 0 Pkt | 41 Pkt | 0 Pkt | -61 dBm | 0 % |
| 1790638686 | 0 Pkt | 1 Pkt | 0 Pkt | -59 dBm | 0 % |
| 1790614815 | 0 Pkt | 37 Pkt | 0 Pkt | -61 dBm | 0 % |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
SUN: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)