APRS Track Direct

My position About ☰

reset

DH8TOM-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DH8TOM-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RX10m*	RX1h*	Eff1h*	Temp*
1791738585	16 Pkt	330 Pkt	100 Pcnt	17.28 Grad
1791738285	16 Pkt	340 Pkt	100 Pcnt	17.28 Grad
1791737984	16 Pkt	330 Pkt	100 Pcnt	17.28 Grad
1791737684	15 Pkt	290 Pkt	98 Pcnt	17.28 Grad
1791737384	14 Pkt	250 Pkt	98 Pcnt	17.28 Grad
1791737084	14 Pkt	200 Pkt	98 Pcnt	17.28 Grad
1791736783	14 Pkt	290 Pkt	98 Pcnt	17.28 Grad
1791736483	14 Pkt	310 Pkt	98 Pcnt	17.28 Grad
1791736183	15 Pkt	260 Pkt	98 Pcnt	17.28 Grad
1791735882	15 Pkt	250 Pkt	98 Pcnt	17.28 Grad
1791735582	15 Pkt	200 Pkt	98 Pcnt	17.28 Grad
1791735282	16 Pkt	260 Pkt	98 Pcnt	17.28 Grad
1791734982	16 Pkt	310 Pkt	98 Pcnt	17.28 Grad
1791734681	16 Pkt	220 Pkt	98 Pcnt	17.28 Grad
1791734381	16 Pkt	170 Pkt	98 Pcnt	17.28 Grad
1791734081	18 Pkt	190 Pkt	100 Pcnt	17.28 Grad
1791733780	19 Pkt	190 Pkt	100 Pcnt	17.28 Grad
1791733480	21 Pkt	250 Pkt	100 Pcnt	17.28 Grad
1791733180	21 Pkt	370 Pkt	100 Pcnt	17.28 Grad
1791732880	21 Pkt	340 Pkt	100 Pcnt	17.28 Grad
1791732579	20 Pkt	320 Pkt	100 Pcnt	17.28 Grad
1791732279	20 Pkt	370 Pkt	100 Pcnt	17.28 Grad
1791731979	19 Pkt	330 Pkt	100 Pcnt	17.28 Grad
1791731678	18 Pkt	280 Pkt	100 Pcnt	17.28 Grad
1791731378	18 Pkt	300 Pkt	100 Pcnt	17.28 Grad

*Used Equation Coefficients:

RX10m: 0, 1, 0

RX1h: 0, 10, 0

Eff1h: 0, 1, 0

Vin: 0, 0.101, 0

Temp: 0, 0.135, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)