APRS Track Direct

My position About ☰

reset

9M4GJS-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9M4GJS-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1790648510	0.54 Load	52.62 DegC	275 Mb	4000 Pkt	127 Pkt
1790648210	0.5 Load	52.62 DegC	265 Mb	2127 Pkt	106 Pkt
1790647910	0.5 Load	53.15 DegC	273 Mb	3724 Pkt	141 Pkt
1790647610	0.51 Load	52.08 DegC	259 Mb	2521 Pkt	125 Pkt
1790647310	0.5 Load	52.62 DegC	261 Mb	3751 Pkt	135 Pkt
1790647010	0.49 Load	52.08 DegC	263 Mb	3210 Pkt	128 Pkt
1790646710	0.53 Load	52.08 DegC	259 Mb	2350 Pkt	129 Pkt
1790646411	0.56 Load	51.54 DegC	269 Mb	4413 Pkt	148 Pkt
1790646110	0.51 Load	52.08 DegC	266 Mb	2333 Pkt	116 Pkt
1790645810	0.54 Load	52.08 DegC	259 Mb	4303 Pkt	134 Pkt
1790645511	0.51 Load	52.08 DegC	271 Mb	2798 Pkt	156 Pkt
1790645210	0.54 Load	51.54 DegC	274 Mb	4174 Pkt	134 Pkt
1790644910	0.52 Load	51.54 DegC	274 Mb	2933 Pkt	135 Pkt
1790644610	0.51 Load	51.54 DegC	267 Mb	3197 Pkt	101 Pkt
1790644311	0.51 Load	52.08 DegC	270 Mb	3108 Pkt	149 Pkt
1790644010	0.47 Load	51.54 DegC	267 Mb	3066 Pkt	132 Pkt
1790643710	0.46 Load	52.08 DegC	272 Mb	3193 Pkt	160 Pkt
1790643411	0.49 Load	52.62 DegC	263 Mb	1611 Pkt	103 Pkt
1790643110	0.45 Load	52.08 DegC	268 Mb	4337 Pkt	136 Pkt
1790642810	0.47 Load	52.62 DegC	274 Mb	2001 Pkt	154 Pkt
1790642511	0.53 Load	52.62 DegC	266 Mb	4387 Pkt	145 Pkt
1790642210	0.53 Load	53.15 DegC	264 Mb	2062 Pkt	120 Pkt
1790641910	0.49 Load	53.69 DegC	268 Mb	4023 Pkt	109 Pkt
1790641611	0.46 Load	53.15 DegC	264 Mb	2224 Pkt	148 Pkt
1790641310	0.46 Load	53.69 DegC	264 Mb	3976 Pkt	143 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)