APRS Track Direct

My position About ☰

reset

SR4NWU Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR4NWU. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Eff*
1744733104	14.25 Volt	220 Pkt	30 Pkt	64 Pcnt	70 Pcnt
1744732804	14.25 Volt	220 Pkt	30 Pkt	63 Pcnt	70 Pcnt
1744732804	14.25 Volt	220 Pkt	30 Pkt	63 Pcnt	70 Pcnt
1744732504	14.25 Volt	220 Pkt	30 Pkt	62 Pcnt	70 Pcnt
1744732205	14.25 Volt	220 Pkt	30 Pkt	61 Pcnt	70 Pcnt
1744732204	14.25 Volt	220 Pkt	30 Pkt	61 Pcnt	70 Pcnt
1744731904	14.25 Volt	220 Pkt	30 Pkt	62 Pcnt	70 Pcnt
1744731605	14.25 Volt	230 Pkt	30 Pkt	61 Pcnt	70 Pcnt
1744731604	14.25 Volt	230 Pkt	30 Pkt	61 Pcnt	70 Pcnt
1744731304	14.25 Volt	250 Pkt	30 Pkt	63 Pcnt	70 Pcnt
1744731005	14.25 Volt	250 Pkt	30 Pkt	62 Pcnt	70 Pcnt
1744731004	14.25 Volt	250 Pkt	30 Pkt	62 Pcnt	70 Pcnt
1744730704	14.25 Volt	260 Pkt	30 Pkt	62 Pcnt	70 Pcnt
1744730405	14.25 Volt	250 Pkt	30 Pkt	61 Pcnt	70 Pcnt
1744730404	14.25 Volt	250 Pkt	30 Pkt	61 Pcnt	70 Pcnt
1744730104	14.25 Volt	240 Pkt	30 Pkt	61 Pcnt	70 Pcnt
1744729805	14.25 Volt	230 Pkt	30 Pkt	60 Pcnt	70 Pcnt
1744729804	14.25 Volt	230 Pkt	30 Pkt	60 Pcnt	70 Pcnt
1744729504	14.25 Volt	230 Pkt	30 Pkt	60 Pcnt	70 Pcnt
1744729205	14.25 Volt	220 Pkt	30 Pkt	61 Pcnt	70 Pcnt
1744729204	14.25 Volt	220 Pkt	30 Pkt	61 Pcnt	70 Pcnt
1744728904	14.25 Volt	230 Pkt	30 Pkt	64 Pcnt	70 Pcnt
1744728605	14.25 Volt	220 Pkt	20 Pkt	64 Pcnt	70 Pcnt
1744728604	14.25 Volt	220 Pkt	20 Pkt	64 Pcnt	70 Pcnt
1744728304	14.25 Volt	220 Pkt	30 Pkt	66 Pcnt	70 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)