APRS Track Direct

My position About ☰

reset

IU2RPR-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IU2RPR-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxPkt*	TxPkt*	Volt Aux*	Ampere Aux*
1753760148	29 Pkt/10m	27 Pkt/10m	3.9 Volt	-0.14 Ampere
1753758347	30 Pkt/10m	26 Pkt/10m	4 Volt	0.06 Ampere
1753756546	41 Pkt/10m	41 Pkt/10m	4 Volt	0.05 Ampere
1753754744	43 Pkt/10m	42 Pkt/10m	3.9 Volt	-0.04 Ampere
1753752943	48 Pkt/10m	39 Pkt/10m	4 Volt	0.06 Ampere
1753751141	45 Pkt/10m	40 Pkt/10m	3.9 Volt	-0.15 Ampere
1753749340	48 Pkt/10m	37 Pkt/10m	4 Volt	0.06 Ampere
1753747539	54 Pkt/10m	41 Pkt/10m	3.9 Volt	-0.14 Ampere
1753745738	51 Pkt/10m	38 Pkt/10m	3.9 Volt	-0.14 Ampere
1753743937	41 Pkt/10m	35 Pkt/10m	4 Volt	0.04 Ampere
1753742135	31 Pkt/10m	28 Pkt/10m	3.9 Volt	-0.14 Ampere
1753740334	53 Pkt/10m	46 Pkt/10m	4 Volt	0.04 Ampere
1753738533	37 Pkt/10m	34 Pkt/10m	3.9 Volt	-0.05 Ampere
1753736731	44 Pkt/10m	42 Pkt/10m	4 Volt	0.04 Ampere
1753734930	37 Pkt/10m	33 Pkt/10m	4 Volt	0.04 Ampere
1753733129	73 Pkt/10m	66 Pkt/10m	3.9 Volt	-0.14 Ampere
1753731328	65 Pkt/10m	64 Pkt/10m	3.9 Volt	-0.08 Ampere
1753729527	28 Pkt/10m	22 Pkt/10m	3.7 Volt	0.04 Ampere
1753725924	24 Pkt/10m	22 Pkt/10m	4 Volt	0.06 Ampere
1753724123	0 Pkt/10m	0 Pkt/10m	3.5 Volt	-0.02 Ampere
1753724109	1 Pkt/10m	1 Pkt/10m	4 Volt	0.05 Ampere
1753722565	36 Pkt/10m	32 Pkt/10m	3.9 Volt	-0.15 Ampere
1753720763	39 Pkt/10m	36 Pkt/10m	4 Volt	0.05 Ampere
1753718961	17 Pkt/10m	15 Pkt/10m	4 Volt	0.08 Ampere
1753717159	24 Pkt/10m	23 Pkt/10m	3.9 Volt	-0.15 Ampere

*Used Equation Coefficients:

RxPkt: 0, 1, 0

TxPkt: 0, 1, 0

Batt: 0, 0.0196, 0

Volt Aux: 0, 0.1, 0

Ampere Aux: 0, 0.01, -1.27

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)