APRS Track Direct

My position About ☰

reset

VE2RRC Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VE2RRC. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1790636221	13.88 Volt	650 Pkt	0 Pkt	87 Pcnt
1790632630	13.8 Volt	760 Pkt	10 Pkt	86 Pcnt
1790632614	13.8 Volt	760 Pkt	10 Pkt	86 Pcnt
1790629032	13.88 Volt	690 Pkt	0 Pkt	88 Pcnt
1790625420	13.88 Volt	550 Pkt	0 Pkt	86 Pcnt
1790621817	13.8 Volt	440 Pkt	0 Pkt	88 Pcnt
1790621814	13.8 Volt	440 Pkt	0 Pkt	88 Pcnt
1790618219	13.8 Volt	560 Pkt	0 Pkt	88 Pcnt
1790611019	13.88 Volt	500 Pkt	0 Pkt	87 Pcnt
1790611014	13.88 Volt	500 Pkt	0 Pkt	87 Pcnt
1790607417	13.8 Volt	590 Pkt	0 Pkt	85 Pcnt
1790603822	13.88 Volt	600 Pkt	0 Pkt	91 Pcnt
1790600217	13.8 Volt	630 Pkt	10 Pkt	87 Pcnt
1790600215	13.8 Volt	630 Pkt	10 Pkt	87 Pcnt
1790596631	13.88 Volt	770 Pkt	30 Pkt	89 Pcnt
1790593033	13.88 Volt	610 Pkt	0 Pkt	88 Pcnt
1790589421	13.88 Volt	500 Pkt	0 Pkt	87 Pcnt
1790589415	13.88 Volt	500 Pkt	0 Pkt	87 Pcnt
1790585817	13.88 Volt	560 Pkt	0 Pkt	88 Pcnt
1790582224	13.88 Volt	490 Pkt	0 Pkt	89 Pcnt
1790578625	13.8 Volt	520 Pkt	0 Pkt	89 Pcnt
1790578615	13.8 Volt	520 Pkt	0 Pkt	89 Pcnt
1790575021	13.88 Volt	450 Pkt	0 Pkt	87 Pcnt
1790571418	13.8 Volt	450 Pkt	0 Pkt	85 Pcnt
1790567817	13.8 Volt	430 Pkt	0 Pkt	84 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

I1: 0, 19.5, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)