This is the latest recevied telemetry packets stored in our database for station/object RA1AO-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732481666 | 0 | 0 | 1 | 0 | 1 |
| 1732480466 | 0 | 0 | 0 | 0 | 0 |
| 1732479266 | 0 | 0 | 1 | 0 | 1 |
| 1732477697 | 0 | 0.03 | 5 | 0 | 22 |
| 1732476497 | 0.01 | 0.03 | 9 | 0 | 23 |
| 1732475297 | 0 | 0.02 | 0 | 0 | 15 |
| 1732474097 | 0 | 0.02 | 1 | 0 | 16 |
| 1732472897 | 0 | 0.02 | 1 | 0 | 17 |
| 1732471697 | 0 | 0.02 | 1 | 0 | 16 |
| 1732470497 | 0 | 0.02 | 0 | 0 | 16 |
| 1732469297 | 0 | 0.02 | 0 | 0 | 15 |
| 1732468097 | 0 | 0.02 | 4 | 0 | 17 |
| 1732466819 | 0 | 0.02 | 5 | 0 | 20 |
| 1732464432 | 0 | 0.02 | 0 | 0 | 16 |
| 1732463232 | 0 | 0.02 | 0 | 0 | 14 |
| 1732462032 | 0 | 0.02 | 0 | 0 | 15 |
| 1732460832 | 0 | 4.3 | 0 | 0 | 15 |
| 1732459632 | 0 | 4.3 | 0 | 0 | 15 |
| 1732458432 | 0 | 4.4 | 0 | 0 | 15 |
| 1732457232 | 0 | 4.5 | 0 | 0 | 15 |
| 1732456032 | 0.1 | 4.5 | 0 | 0 | 16 |
| 1732454832 | 0.4 | 4.9 | 3 | 0 | 19 |
*Used Equation Coefficients:
Value1: 0, 0.005, 0
Value2: 0, 0.005, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)