This is the latest recevied telemetry packets stored in our database for station/object F4MLV-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | RX_rate* | RelRate* | DrpRate* | Value5* |
|---|---|---|---|---|---|
| 1790631141 | 4.29 VDC | 0 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1790630881 | 4.3 VDC | 140 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1790629981 | 4.3 VDC | 132 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1790629080 | 4.3 VDC | 136 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1790628179 | 4.29 VDC | 0 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1790627604 | 4.29 VDC | 0 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1790627552 | 4.31 VDC | 0 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1790627438 | 4.29 VDC | 124 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1790626538 | 4.3 VDC | 120 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1790625638 | 4.29 VDC | 124 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1790624737 | 4.31 VDC | 132 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1790623837 | 4.31 VDC | 132 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1790622937 | 4.31 VDC | 148 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1790622035 | 4.29 VDC | 0 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1790603370 | 4.29 VDC | 136 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1790602469 | 4.29 VDC | 152 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1790601569 | 4.29 VDC | 172 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1790600669 | 4.28 VDC | 220 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1790599769 | 4.29 VDC | 204 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1790598869 | 4.29 VDC | 124 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1790597968 | 4.29 VDC | 76 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1790597068 | 4.29 VDC | 104 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1790596168 | 4.29 VDC | 108 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1790595268 | 4.29 VDC | 176 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1790594368 | 4.3 VDC | 164 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
RX_rate: 0, 1, 0
RelRate: 0, 1, 0
DrpRate: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)