APRS Track Direct

My position About ☰

reset

W0JRT-6 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W0JRT-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Battry*	Chg24*	LoadC*	Temp*
1770125928	12.53 V	2260 mAh	83.6 mA	27 DegF
1770124133	12.53 V	2260 mAh	84 mA	28 DegF
1770122329	12.53 V	2260 mAh	84 mA	28 DegF
1770120534	12.54 V	2260 mAh	83.6 mA	28 DegF
1770118736	12.54 V	2260 mAh	84 mA	29 DegF
1770115137	12.56 V	2260 mAh	84 mA	32 DegF
1770113325	12.58 V	2260 mAh	84.2 mA	33 DegF
1770111525	12.58 V	2260 mAh	84 mA	34 DegF
1770109737	12.59 V	2260 mAh	84.2 mA	34 DegF
1770107929	12.59 V	2260 mAh	84.2 mA	35 DegF
1770106131	12.61 V	2260 mAh	84.2 mA	36 DegF
1770104329	12.61 V	2260 mAh	84.2 mA	37 DegF
1770102540	12.62 V	2260 mAh	84.2 mA	37 DegF
1770100734	12.62 V	2260 mAh	84.6 mA	37 DegF
1770098926	12.64 V	2260 mAh	84.2 mA	37 DegF
1770097139	12.66 V	2260 mAh	84.6 mA	37 DegF
1770095336	12.67 V	2260 mAh	84.6 mA	37 DegF
1770093533	12.67 V	2260 mAh	84.8 mA	37 DegF
1770091726	12.69 V	2260 mAh	84 mA	38 DegF
1770089939	12.7 V	2260 mAh	84.4 mA	37 DegF
1770088133	12.72 V	2260 mAh	84 mA	39 DegF
1770086336	12.74 V	2260 mAh	84.6 mA	38 DegF
1770084529	12.75 V	2260 mAh	84.8 mA	39 DegF
1770082727	12.75 V	2260 mAh	84.6 mA	40 DegF
1770080940	12.77 V	2260 mAh	85 mA	40 DegF

*Used Equation Coefficients:

Battry: 0, 0.016, 0

Charge: 0, 2, 0

Chg24: 0, 10, 0

LoadC: 0, 0.2, 0

Temp: 0, 1, -100

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)