This is the latest recevied telemetry packets stored in our database for station/object DO7BTR-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732223883 | 0.7 deg C | 93.5 % | 993.6 hPa | 0 | 0 |
| 1732222983 | 0.8 deg C | 93.5 % | 993.6 hPa | 0 | 0 |
| 1732222078 | 1.1 deg C | 93.5 % | 993.4 hPa | 0 | 0 |
| 1732221181 | 1.4 deg C | 93.5 % | 993.4 hPa | 0 | 0 |
| 1732220285 | 1.4 deg C | 93.5 % | 993.2 hPa | 0 | 0 |
| 1732219385 | 1.4 deg C | 93.5 % | 993 hPa | 0 | 0 |
| 1732215776 | 1.3 deg C | 93.2 % | 992.4 hPa | 0 | 0 |
| 1732213982 | 1.3 deg C | 93.4 % | 992 hPa | 0 | 0 |
| 1732213081 | 1.3 deg C | 93.3 % | 991.9 hPa | 0 | 0 |
| 1732209480 | 1.9 deg C | 93.4 % | 991.4 hPa | 0 | 0 |
| 1732207681 | 1.9 deg C | 93.3 % | 991.5 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)