APRS Track Direct

My position About ☰

reset

ED1ZBA-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ED1ZBA-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1836274110	13.62 Volt	170 Pkt	50 Pkt	68 Pcnt
1836274109	13.62 Volt	170 Pkt	50 Pkt	68 Pcnt
1836273960	13.62 Volt	170 Pkt	50 Pkt	64 Pcnt
1762302702	13.54 Volt	220 Pkt	110 Pkt	69 Pcnt
1762301802	13.54 Volt	220 Pkt	110 Pkt	67 Pcnt
1762300901	13.62 Volt	220 Pkt	110 Pkt	63 Pcnt
1762300002	13.54 Volt	230 Pkt	110 Pkt	60 Pcnt
1762300001	13.54 Volt	230 Pkt	110 Pkt	60 Pcnt
1762299102	13.54 Volt	230 Pkt	110 Pkt	59 Pcnt
1762298202	13.54 Volt	240 Pkt	110 Pkt	62 Pcnt
1762296402	13.62 Volt	230 Pkt	100 Pkt	64 Pcnt
1762296401	13.62 Volt	230 Pkt	100 Pkt	64 Pcnt
1762295502	13.54 Volt	210 Pkt	100 Pkt	63 Pcnt
1762293702	13.54 Volt	190 Pkt	100 Pkt	62 Pcnt
1762292803	13.54 Volt	160 Pkt	90 Pkt	61 Pcnt
1762292801	13.54 Volt	160 Pkt	90 Pkt	61 Pcnt
1762291902	13.62 Volt	170 Pkt	90 Pkt	60 Pcnt
1762291002	13.54 Volt	180 Pkt	90 Pkt	58 Pcnt
1762290103	13.54 Volt	190 Pkt	90 Pkt	57 Pcnt
1762289202	13.54 Volt	200 Pkt	100 Pkt	57 Pcnt
1762289201	13.54 Volt	200 Pkt	100 Pkt	57 Pcnt
1762288302	13.54 Volt	200 Pkt	90 Pkt	56 Pcnt
1762287402	13.62 Volt	200 Pkt	90 Pkt	58 Pcnt
1762286502	13.62 Volt	200 Pkt	90 Pkt	61 Pcnt
1762285602	13.62 Volt	190 Pkt	90 Pkt	64 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.074, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)