This is the latest recevied telemetry packets stored in our database for station/object I1EPJ-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Bat* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1791744855 | 4.16 VDC | 0 VDC | 0 | 0 | 0 |
| 1791744342 | 4.18 VDC | 5.02 VDC | 0 | 0 | 0 |
| 1791743439 | 4.18 VDC | 5.06 VDC | 0 | 0 | 0 |
| 1791742536 | 4.19 VDC | 5 VDC | 0 | 0 | 0 |
| 1791741633 | 4.18 VDC | 5.06 VDC | 0 | 0 | 0 |
| 1791740730 | 4.19 VDC | 5 VDC | 0 | 0 | 0 |
| 1791739827 | 4.19 VDC | 5.06 VDC | 0 | 0 | 0 |
| 1791738924 | 4.19 VDC | 5.02 VDC | 0 | 0 | 0 |
| 1791738020 | 4.2 VDC | 5.04 VDC | 0 | 0 | 0 |
| 1791737117 | 4.2 VDC | 4.94 VDC | 0 | 0 | 0 |
| 1791736214 | 4.2 VDC | 4.96 VDC | 0 | 0 | 0 |
| 1791735311 | 4.2 VDC | 4.9 VDC | 0 | 0 | 0 |
| 1791734408 | 4.2 VDC | 4.88 VDC | 0 | 0 | 0 |
| 1791733505 | 4.19 VDC | 4.8 VDC | 0 | 0 | 0 |
| 1791732602 | 4.18 VDC | 4.8 VDC | 0 | 0 | 0 |
| 1791731699 | 4.15 VDC | 4.8 VDC | 0 | 0 | 0 |
| 1791730796 | 4.15 VDC | 4.8 VDC | 0 | 0 | 0 |
| 1791729893 | 4.11 VDC | 4.8 VDC | 0 | 0 | 0 |
| 1791728990 | 4.09 VDC | 4.8 VDC | 0 | 0 | 0 |
| 1791728086 | 4.05 VDC | 4.8 VDC | 0 | 0 | 0 |
| 1791727183 | 4.02 VDC | 4.8 VDC | 0 | 0 | 0 |
| 1791726280 | 3.99 VDC | 4.8 VDC | 0 | 0 | 0 |
| 1791725377 | 3.98 VDC | 4.8 VDC | 0 | 0 | 0 |
| 1791724474 | 3.94 VDC | 4.8 VDC | 0 | 0 | 0 |
| 1791723571 | 3.93 VDC | 4.8 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)