APRS Track Direct

My position About ☰

reset

BM3FFG-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BM3FFG-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	CPUTemp*	RxPkts/20m*	RxPkts/1h*	RxPkts/24h*
1732465940	33.3 C	16 p	48 p	1493 p
1732464740	33.8 C	16 p	45 p	1491 p
1732463539	34.2 C	16 p	40 p	1485 p
1732462340	33.2 C	13 p	39 p	1479 p
1732461139	33.7 C	11 p	45 p	1475 p
1732459940	33.2 C	15 p	47 p	1475 p
1732458739	33.8 C	19 p	39 p	1474 p
1732457540	34.5 C	13 p	31 p	1466 p
1732456666	34.3 C	8 p	21 p	1464 p
1732455467	33.4 C	11 p	16 p	1475 p
1732454267	35.4 C	2 p	8 p	1499 p
1732453067	34.4 C	3 p	13 p	1547 p

*Used Equation Coefficients:

CPUTemp: 0, 1, 0

RxPkts/20m: 0, 1, 0

RxPkts/1h: 0, 1, 0

RxPkts/24h: 0, 1, 0

DiGi: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)