This is the latest recevied telemetry packets stored in our database for station/object DO6GZ-L1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1749328874 | 28.6 deg C | 41.8 % | 0 | 0 | 0 |
| 1749327974 | 28.2 deg C | 42.3 % | 0 | 0 | 0 |
| 1749327074 | 28.2 deg C | 42.1 % | 0 | 0 | 0 |
| 1749326174 | 28.6 deg C | 41.7 % | 0 | 0 | 0 |
| 1749325274 | 28.6 deg C | 41.5 % | 0 | 0 | 0 |
| 1749324943 | 28.6 deg C | 41.3 % | 0 | 0 | 0 |
| 1749324043 | 28.7 deg C | 41.3 % | 0 | 0 | 0 |
| 1749323143 | 28.7 deg C | 41.3 % | 0 | 0 | 0 |
| 1749322243 | 29.1 deg C | 40.9 % | 0 | 0 | 0 |
| 1749321343 | 29 deg C | 41.4 % | 0 | 0 | 0 |
| 1749320443 | 29.3 deg C | 41 % | 0 | 0 | 0 |
| 1749319542 | 29.2 deg C | 40.9 % | 0 | 0 | 0 |
| 1749318642 | 29.4 deg C | 40.3 % | 0 | 0 | 0 |
| 1749317742 | 29.1 deg C | 40.5 % | 0 | 0 | 0 |
| 1749316842 | 28.8 deg C | 40.8 % | 0 | 0 | 0 |
| 1749315942 | 29.2 deg C | 39.1 % | 0 | 0 | 0 |
| 1749315042 | 29.1 deg C | 39.2 % | 0 | 0 | 0 |
| 1749314142 | 29.1 deg C | 39.3 % | 0 | 0 | 0 |
| 1749313242 | 29.2 deg C | 39.6 % | 0 | 0 | 0 |
| 1749312909 | 29.2 deg C | 39.6 % | 0 | 0 | 0 |
| 1749312009 | 29.2 deg C | 39.8 % | 0 | 0 | 0 |
| 1749311109 | 29.2 deg C | 40 % | 0 | 0 | 0 |
| 1749310208 | 29.1 deg C | 39.9 % | 0 | 0 | 0 |
| 1749309308 | 28.9 deg C | 40.1 % | 0 | 0 | 0 |
| 1749308408 | 28.6 deg C | 39.9 % | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)