This is the latest recevied telemetry packets stored in our database for station/object TA1KX-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RSSI* | CPU* | BAT* | LFS* | UPTIME* |
|---|---|---|---|---|---|
| 1791740032 | -39 dBm | 48 C | 86 % | 24 % | 0 h |
| 1791739731 | -38 dBm | 48 C | 86 % | 24 % | 0 h |
| 1791739432 | -45 dBm | 47 C | 86 % | 24 % | 0 h |
| 1791739132 | -44 dBm | 46 C | 86 % | 23 % | 0 h |
| 1791738259 | -40 dBm | 48 C | 82 % | 23 % | 0 h |
| 1791737959 | -42 dBm | 48 C | 82 % | 23 % | 0 h |
| 1791737659 | -42 dBm | 48 C | 82 % | 23 % | 0 h |
| 1791737360 | -38 dBm | 46 C | 82 % | 22 % | 0 h |
| 1791736966 | -42 dBm | 48 C | 93 % | 22 % | 1 h |
| 1791736665 | -41 dBm | 48 C | 93 % | 22 % | 0 h |
| 1791736365 | -48 dBm | 48 C | 93 % | 22 % | 0 h |
| 1791736065 | -45 dBm | 47 C | 93 % | 22 % | 0 h |
| 1791735765 | -50 dBm | 47 C | 93 % | 21 % | 0 h |
| 1791735461 | -41 dBm | 48 C | 93 % | 21 % | 0 h |
| 1791735161 | -43 dBm | 49 C | 93 % | 21 % | 0 h |
| 1791734861 | -41 dBm | 49 C | 93 % | 21 % | 0 h |
| 1791734561 | -43 dBm | 49 C | 93 % | 21 % | 0 h |
| 1791734260 | -38 dBm | 48 C | 93 % | 21 % | 0 h |
| 1791733960 | -38 dBm | 48 C | 93 % | 21 % | 0 h |
| 1791733660 | -40 dBm | 47 C | 93 % | 21 % | 0 h |
| 1791733361 | -39 dBm | 44 C | 93 % | 21 % | 0 h |
| 1791733316 | -43 dBm | 43 C | 64 % | 21 % | 0 h |
*Used Equation Coefficients:
RSSI: 0, 1, -100
CPU: 0, 1, 0
BAT: 0, 1, 0
LFS: 0, 1, 0
UPTIME: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)