APRS Track Direct

My position About ☰

reset

VK4RJW-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK4RJW-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1766294316	12.38 Volt	150 Pkt	10 Pkt	35 Pcnt	31.5 C
1766294016	12.38 Volt	260 Pkt	10 Pkt	35 Pcnt	31.5 C
1766293722	12.38 Volt	270 Pkt	0 Pkt	32 Pcnt	31.5 C
1766293715	12.38 Volt	270 Pkt	0 Pkt	32 Pcnt	31.5 C
1766293415	12.38 Volt	220 Pkt	0 Pkt	31 Pcnt	31.5 C
1766293119	12.38 Volt	110 Pkt	0 Pkt	29 Pcnt	31.5 C
1766293115	12.38 Volt	110 Pkt	0 Pkt	29 Pcnt	31.5 C
1766292816	12.38 Volt	80 Pkt	0 Pkt	28 Pcnt	31.5 C
1766292519	12.38 Volt	90 Pkt	20 Pkt	28 Pcnt	31 C
1766292516	12.38 Volt	90 Pkt	20 Pkt	28 Pcnt	31 C
1766292216	12.38 Volt	170 Pkt	20 Pkt	28 Pcnt	31 C
1766291918	12.38 Volt	230 Pkt	0 Pkt	28 Pcnt	31 C
1766291916	12.38 Volt	230 Pkt	0 Pkt	28 Pcnt	31 C
1766291616	12.38 Volt	170 Pkt	0 Pkt	28 Pcnt	31 C
1766291319	12.38 Volt	100 Pkt	0 Pkt	27 Pcnt	31 C
1766291316	12.38 Volt	100 Pkt	0 Pkt	27 Pcnt	31 C
1766291016	12.38 Volt	90 Pkt	0 Pkt	28 Pcnt	31 C
1766290718	12.38 Volt	110 Pkt	20 Pkt	30 Pcnt	31 C
1766290716	12.38 Volt	110 Pkt	20 Pkt	30 Pcnt	31 C
1766290416	12.38 Volt	100 Pkt	30 Pkt	29 Pcnt	31 C
1766290116	12.38 Volt	90 Pkt	30 Pkt	30 Pcnt	31 C
1766289816	12.38 Volt	70 Pkt	20 Pkt	30 Pcnt	31 C
1766289519	12.38 Volt	50 Pkt	0 Pkt	32 Pcnt	31 C
1766289516	12.38 Volt	50 Pkt	0 Pkt	32 Pcnt	31 C
1766289216	12.38 Volt	40 Pkt	0 Pkt	32 Pcnt	31.5 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)