This is the latest recevied telemetry packets stored in our database for station/object DO1DW-83. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | eGAS* | Temp.out* |
|---|---|---|---|---|---|
| 1791744345 | 960.8 hPa | 10.3 C deg | 72.7 % | 81 - | 0 C deg |
| 1791742518 | 960.5 hPa | 10.6 C deg | 72.7 % | 80 - | 0 C deg |
| 1791738867 | 959.8 hPa | 11.4 C deg | 72.5 % | 74 - | 0 C deg |
| 1791737016 | 959.3 hPa | 12.2 C deg | 72.5 % | 70 - | 0 C deg |
| 1791735195 | 958.9 hPa | 13.4 C deg | 72.8 % | 64 - | 0 C deg |
| 1791733409 | 958.5 hPa | 13.7 C deg | 73.4 % | 63 - | 0 C deg |
| 1791729693 | 958.3 hPa | 13.9 C deg | 72.8 % | 60 - | 0 C deg |
| 1791727864 | 958.1 hPa | 14.8 C deg | 73.6 % | 58 - | 0 C deg |
| 1791724209 | 957.9 hPa | 13.8 C deg | 73 % | 63 - | 0 C deg |
| 1791716889 | 957.8 hPa | 17.1 C deg | 60.1 % | 63 - | 0 C deg |
| 1791709561 | 957.4 hPa | 9.9 C deg | 73.3 % | 80 - | 0 C deg |
| 1791705900 | 956.9 hPa | 10.3 C deg | 73.3 % | 77 - | 0 C deg |
| 1791696746 | 956.3 hPa | 8.9 C deg | 73.9 % | 85 - | 0 C deg |
| 1791689421 | 956.3 hPa | 8.9 C deg | 74.1 % | 86 - | 0 C deg |
| 1791687596 | 956.4 hPa | 8.9 C deg | 74.1 % | 86 - | 0 C deg |
| 1791683937 | 956.4 hPa | 8.8 C deg | 74 % | 87 - | 0 C deg |
| 1791680260 | 956.7 hPa | 9 C deg | 74.1 % | 86 - | 0 C deg |
| 1791676605 | 956.9 hPa | 9.4 C deg | 74.1 % | 84 - | 0 C deg |
| 1791671134 | 956.9 hPa | 10.2 C deg | 74.4 % | 80 - | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
eGAS: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)