This is the latest recevied telemetry packets stored in our database for station/object WA6ODP-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274236 | 10.28 | 391.2 | 483 | 734 | 0 |
| 1782505574 | 10.31 | 360.44 | 462 | 725 | 0 |
| 1782505561 | 10.28 | 359.56 | 456 | 724 | 0 |
| 1782503774 | 10.31 | 356.04 | 456 | 705 | 0 |
| 1782503763 | 10.31 | 356.04 | 451 | 704 | 0 |
| 1782501974 | 10.31 | 370.11 | 462 | 722 | 0 |
| 1782501963 | 10.28 | 370.11 | 462 | 722 | 0 |
| 1782500174 | 10.31 | 362.2 | 462 | 743 | 0 |
| 1782500165 | 10.31 | 361.32 | 462 | 743 | 0 |
| 1782498374 | 10.31 | 338.46 | 451 | 713 | 0 |
| 1782498365 | 10.31 | 338.46 | 451 | 712 | 0 |
| 1782496574 | 10.31 | 318.25 | 429 | 673 | 0 |
| 1782496567 | 10.31 | 318.25 | 440 | 662 | 0 |
| 1782494774 | 10.28 | 311.21 | 435 | 662 | 0 |
| 1782494768 | 10.31 | 311.21 | 435 | 662 | 0 |
| 1782492974 | 10.31 | 298.03 | 419 | 648 | 0 |
| 1782492969 | 10.34 | 298.03 | 424 | 648 | 0 |
| 1782491174 | 10.31 | 286.6 | 419 | 627 | 0 |
| 1782491169 | 10.31 | 286.6 | 419 | 615 | 0 |
| 1782489374 | 10.28 | 276.93 | 408 | 615 | 0 |
| 1782489371 | 10.31 | 276.93 | 413 | 615 | 0 |
| 1782487574 | 10.28 | 272.54 | 402 | 614 | 0 |
| 1782487571 | 10.31 | 272.54 | 413 | 614 | 0 |
| 1782485774 | 7.82 | 271.66 | 408 | 612 | 0 |
| 1782485773 | 10.31 | 271.66 | 408 | 612 | 0 |
*Used Equation Coefficients:
Value1: 0, 0.0293, 0
Value2: 0, 0.879, -459.67
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)