APRS Track Direct

My position About ☰

reset

VK2BN-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK2BN-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1836274354	0.02 Rx Erlang	0.01 Tx Erlang	23 count/10m	2 count/10m	6 count/10m
1836273904	0.03 Rx Erlang	0.01 Tx Erlang	27 count/10m	2 count/10m	5 count/10m
1765664351	0.02 Rx Erlang	0.01 Tx Erlang	20 count/10m	2 count/10m	4 count/10m
1765663151	0.03 Rx Erlang	0.01 Tx Erlang	31 count/10m	2 count/10m	7 count/10m
1765661951	0.02 Rx Erlang	0.01 Tx Erlang	22 count/10m	2 count/10m	5 count/10m
1765660751	0.03 Rx Erlang	0.01 Tx Erlang	31 count/10m	2 count/10m	9 count/10m
1765659551	0.04 Rx Erlang	0.01 Tx Erlang	34 count/10m	2 count/10m	5 count/10m
1765658351	0.04 Rx Erlang	0.01 Tx Erlang	38 count/10m	1 count/10m	8 count/10m
1765657151	0.02 Rx Erlang	0.01 Tx Erlang	20 count/10m	1 count/10m	7 count/10m
1765655951	0.03 Rx Erlang	0.01 Tx Erlang	24 count/10m	1 count/10m	6 count/10m
1765654751	0.03 Rx Erlang	0.01 Tx Erlang	25 count/10m	1 count/10m	5 count/10m
1765653551	0.03 Rx Erlang	0.01 Tx Erlang	25 count/10m	2 count/10m	6 count/10m
1765652351	0.04 Rx Erlang	0.01 Tx Erlang	34 count/10m	2 count/10m	7 count/10m
1765651151	0.04 Rx Erlang	0.01 Tx Erlang	30 count/10m	2 count/10m	6 count/10m
1765649951	0.03 Rx Erlang	0.01 Tx Erlang	27 count/10m	2 count/10m	6 count/10m
1765648751	0.03 Rx Erlang	0.01 Tx Erlang	30 count/10m	2 count/10m	5 count/10m
1765647551	0.04 Rx Erlang	0.01 Tx Erlang	32 count/10m	2 count/10m	6 count/10m
1765646351	0.02 Rx Erlang	0.01 Tx Erlang	24 count/10m	2 count/10m	6 count/10m
1765645151	0.02 Rx Erlang	0.01 Tx Erlang	26 count/10m	2 count/10m	6 count/10m
1765643951	0.04 Rx Erlang	0.01 Tx Erlang	32 count/10m	2 count/10m	7 count/10m
1765642751	0.02 Rx Erlang	0.01 Tx Erlang	21 count/10m	2 count/10m	5 count/10m
1765641551	0.03 Rx Erlang	0.01 Tx Erlang	25 count/10m	2 count/10m	7 count/10m
1765640351	0.04 Rx Erlang	0.01 Tx Erlang	33 count/10m	2 count/10m	6 count/10m
1765639151	0.03 Rx Erlang	0.01 Tx Erlang	29 count/10m	2 count/10m	7 count/10m
1765637951	0.03 Rx Erlang	0.01 Tx Erlang	30 count/10m	2 count/10m	5 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)