This is the latest recevied telemetry packets stored in our database for station/object YD1OCG-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | CTemp* | CLoad* | CFreq* | RFree* | DTemp* |
|---|---|---|---|---|---|
| 1790655530 | 35 C | 2 % | 1977 MHz | 77 % | 31 C |
| 1790655287 | 34 C | 2 % | 1949 MHz | 77 % | 30 C |
| 1790655015 | 35 C | 4 % | 1968 MHz | 77 % | 30 C |
| 1790654719 | 35 C | 2 % | 1995 MHz | 77 % | 29 C |
| 1790654469 | 34 C | 4 % | 2053 MHz | 77 % | 31 C |
| 1790654170 | 34 C | 4 % | 2106 MHz | 77 % | 31 C |
| 1790653925 | 35 C | 6 % | 2108 MHz | 77 % | 32 C |
| 1790653634 | 34 C | 2 % | 2004 MHz | 77 % | 31 C |
| 1790653395 | 34 C | 4 % | 1999 MHz | 77 % | 31 C |
| 1790653149 | 34 C | 4 % | 1996 MHz | 77 % | 31 C |
| 1790652890 | 34 C | 4 % | 1994 MHz | 77 % | 31 C |
| 1790652594 | 34 C | 2 % | 1969 MHz | 77 % | 31 C |
| 1790652310 | 33 C | 6 % | 1982 MHz | 77 % | 31 C |
| 1790652055 | 34 C | 4 % | 1921 MHz | 77 % | 31 C |
| 1790651809 | 33 C | 2 % | 1922 MHz | 77 % | 31 C |
| 1790651564 | 33 C | 4 % | 2058 MHz | 77 % | 30 C |
| 1790651324 | 32 C | 4 % | 2080 MHz | 77 % | 31 C |
| 1790651033 | 32 C | 4 % | 1927 MHz | 77 % | 31 C |
| 1790650749 | 32 C | 4 % | 2051 MHz | 77 % | 31 C |
| 1790650464 | 34 C | 4 % | 1994 MHz | 77 % | 31 C |
| 1790650215 | 33 C | 4 % | 1998 MHz | 77 % | 29 C |
| 1790649954 | 32 C | 4 % | 1885 MHz | 77 % | 29 C |
| 1790649661 | 32 C | 4 % | 2085 MHz | 77 % | 31 C |
| 1790649406 | 32 C | 2 % | 1985 MHz | 78 % | 30 C |
| 1790649120 | 30 C | 2 % | 1861 MHz | 78 % | 31 C |
*Used Equation Coefficients:
CTemp: 0, 1, 0
CLoad: 0, 1, 0
CFreq: 0, 1, 0
RFree: 0, 1, 0
DTemp: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)