This is the latest recevied telemetry packets stored in our database for station/object 9A7KXP-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274450 | 512 | 0 | 0 | 0 | 0 |
| 1766160223 | 502 | 0 | 0 | 0 | 0 |
| 1766159297 | 504 | 0 | 0 | 0 | 0 |
| 1766158357 | 509 | 0 | 0 | 0 | 0 |
| 1766152863 | 503 | 0 | 0 | 0 | 0 |
| 1766151929 | 497 | 0 | 0 | 0 | 0 |
| 1766150993 | 507 | 0 | 0 | 0 | 0 |
| 1766150055 | 510 | 0 | 0 | 0 | 0 |
| 1766149116 | 500 | 0 | 0 | 0 | 0 |
| 1766148177 | 510 | 0 | 0 | 0 | 0 |
| 1766147249 | 512 | 0 | 0 | 0 | 0 |
| 1766146298 | 511 | 0 | 0 | 0 | 0 |
| 1766145359 | 512 | 0 | 0 | 0 | 0 |
| 1766144418 | 514 | 0 | 0 | 0 | 0 |
| 1766143470 | 516 | 0 | 0 | 0 | 0 |
| 1766142529 | 516 | 0 | 0 | 0 | 0 |
| 1766141592 | 519 | 0 | 0 | 0 | 0 |
| 1766140653 | 520 | 0 | 0 | 0 | 0 |
| 1766139713 | 525 | 0 | 0 | 0 | 0 |
| 1766138780 | 526 | 0 | 0 | 0 | 0 |
| 1766137860 | 516 | 0 | 0 | 0 | 0 |
| 1766136926 | 515 | 0 | 0 | 0 | 0 |
| 1766135992 | 513 | 0 | 0 | 0 | 0 |
| 1766135056 | 514 | 0 | 0 | 0 | 0 |
| 1766134114 | 518 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)