This is the latest recevied telemetry packets stored in our database for station/object PU2LYJ-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732309586 | 34 | 48 | 11 | 47 | 135 |
| 1732300403 | 32 | 54 | 9 | 141 | 135 |
| 1732299507 | 32 | 54 | 9 | 75 | 135 |
| 1732291504 | 32 | 50 | 6 | 76 | 135 |
| 1732289677 | 32 | 52 | 6 | 51 | 135 |
| 1732288771 | 32 | 52 | 5 | 40 | 135 |
| 1732287867 | 32 | 52 | 5 | 35 | 135 |
| 1732286970 | 32 | 52 | 5 | 40 | 135 |
| 1732286066 | 32 | 53 | 5 | 36 | 135 |
| 1732285168 | 32 | 52 | 4 | 33 | 135 |
| 1732284271 | - | - | - | - | - |
| 1732283325 | 32 | 52 | 4 | 142 | 135 |
| 1732282374 | 32 | 52 | 4 | 133 | 135 |
| 1732281431 | 31 | 51 | 3 | 105 | 135 |
| 1732280503 | 31 | 52 | 3 | 103 | 127 |
| 1732278656 | 31 | 50 | 3 | 86 | 135 |
| 1732277738 | 31 | 50 | 2 | 64 | 135 |
| 1732276831 | 31 | 50 | 2 | 26 | 135 |
| 1732275942 | 31 | 50 | 2 | 25 | 135 |
| 1732275055 | 30 | 50 | 2 | 24 | 135 |
| 1732274168 | 30 | 51 | 1 | 69 | 135 |
| 1732273262 | 30 | 51 | 1 | 56 | 135 |
| 1732272356 | 30 | 52 | 1 | 43 | 135 |
| 1732271461 | 29 | 53 | 1 | 18 | 135 |
| 1732270576 | 29 | 54 | 0 | 49 | 135 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)