This is the latest recevied telemetry packets stored in our database for station/object YD1OCG-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | CPU_Temp* | CPU_Load* | CPU_Freq* | RAM_Free* | Drive_Temp* |
|---|---|---|---|---|---|
| 1790659733 | 44 C | 5 % | 1872 MHz | 23 % | 40 C |
| 1790659458 | 44 C | 8 % | 1833 MHz | 23 % | 40 C |
| 1790659208 | 44 C | 5 % | 1874 MHz | 23 % | 40 C |
| 1790658968 | 44 C | 5 % | 2418 MHz | 23 % | 40 C |
| 1790658698 | 44 C | 6 % | 1419 MHz | 23 % | 40 C |
| 1790658438 | 44 C | 5 % | 1771 MHz | 23 % | 41 C |
| 1790658173 | 44 C | 6 % | 1583 MHz | 30 % | 40 C |
| 1790657884 | 44 C | 11 % | 1833 MHz | 30 % | 40 C |
| 1790657588 | 44 C | 32 % | 2416 MHz | 30 % | 40 C |
| 1790657293 | 44 C | 53 % | 2083 MHz | 30 % | 40 C |
| 1790657044 | 44 C | 8 % | 1333 MHz | 30 % | 40 C |
| 1790656778 | 44 C | 5 % | 1576 MHz | 30 % | 40 C |
| 1790656498 | 44 C | 6 % | 1832 MHz | 30 % | 40 C |
| 1790656238 | 44 C | 8 % | 1833 MHz | 30 % | 40 C |
| 1790655938 | 44 C | 9 % | 1333 MHz | 30 % | 40 C |
| 1790655643 | 44 C | 33 % | 2416 MHz | 30 % | 40 C |
| 1790655364 | 44 C | 11 % | 1362 MHz | 30 % | 40 C |
| 1790655068 | 43 C | 9 % | 1333 MHz | 31 % | 39 C |
| 1790654828 | 43 C | 8 % | 1562 MHz | 30 % | 39 C |
| 1790654553 | 43 C | 8 % | 1833 MHz | 30 % | 39 C |
| 1790654251 | 44 C | 7 % | 1364 MHz | 30 % | 39 C |
| 1790653978 | 44 C | 8 % | 1407 MHz | 30 % | 40 C |
| 1790653683 | 44 C | 6 % | 2416 MHz | 31 % | 40 C |
| 1790653388 | 44 C | 9 % | 1833 MHz | 31 % | 39 C |
| 1790653123 | 43 C | 9 % | 1922 MHz | 30 % | 39 C |
*Used Equation Coefficients:
CPU_Temp: 0, 1, 0
CPU_Load: 0, 1, 0
CPU_Freq: 0, 1, 0
RAM_Free: 0, 1, 0
Drive_Temp: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)