This is the latest recevied telemetry packets stored in our database for station/object SP2JAR-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1790641348 | 91 | 936 | 0 | 0 | 0 |
| 1790639547 | 90 | 928 | 0 | 0 | 0 |
| 1790637746 | 89 | 921 | 0 | 0 | 0 |
| 1790635945 | 88 | 910 | 0 | 0 | 0 |
| 1790634145 | 87 | 903 | 0 | 0 | 0 |
| 1790632344 | 86 | 895 | 0 | 0 | 0 |
| 1790630552 | 85 | 882 | 0 | 0 | 0 |
| 1790628751 | 84 | 872 | 0 | 0 | 0 |
| 1790626951 | 83 | 858 | 0 | 0 | 0 |
| 1790625150 | 82 | 850 | 0 | 0 | 0 |
| 1790623349 | 81 | 843 | 0 | 0 | 0 |
| 1790621548 | 80 | 834 | 0 | 0 | 0 |
| 1790619747 | 79 | 827 | 0 | 0 | 0 |
| 1790617947 | 78 | 811 | 0 | 0 | 0 |
| 1790616146 | 77 | 794 | 0 | 0 | 0 |
| 1790614345 | 76 | 769 | 0 | 0 | 0 |
| 1790612544 | 75 | 758 | 0 | 0 | 0 |
| 1790610743 | 74 | 750 | 0 | 0 | 0 |
| 1790608952 | 73 | 742 | 0 | 0 | 0 |
| 1790607151 | 72 | 725 | 0 | 0 | 0 |
| 1790605351 | 71 | 705 | 0 | 0 | 0 |
| 1790603550 | 70 | 696 | 0 | 0 | 0 |
| 1790601749 | 69 | 687 | 0 | 0 | 0 |
| 1790599948 | 68 | 673 | 0 | 0 | 0 |
| 1790598147 | 67 | 663 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)