This is the latest recevied telemetry packets stored in our database for station/object IW5BNK-99. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | eGAS* | Temp.out* |
|---|---|---|---|---|---|
| 1790684365 | 995.2 hPa | 27.7 C deg | 49.5 % | 51 - | 0 C deg |
| 1790679690 | 995.7 hPa | 25.2 C deg | 57.9 % | 24 - | 0 C deg |
| 1790633378 | 994.8 hPa | 29.2 C deg | 48.4 % | 50 - | 0 C deg |
| 1790631377 | 994.7 hPa | 28.8 C deg | 49.3 % | 51 - | 0 C deg |
| 1790627689 | 994.4 hPa | 28.3 C deg | 49.6 % | 52 - | 0 C deg |
| 1790622197 | 994.1 hPa | 28.4 C deg | 50.6 % | 50 - | 0 C deg |
| 1790620373 | 993.8 hPa | 28.6 C deg | 50.7 % | 49 - | 0 C deg |
| 1790615360 | 993.2 hPa | 29.1 C deg | 47.6 % | 46 - | 0 C deg |
| 1790615307 | 993.2 hPa | 29.1 C deg | 47.6 % | 46 - | 0 C deg |
| 1790614891 | 993.2 hPa | 29.1 C deg | 47.6 % | 46 - | 0 C deg |
| 1790611327 | 993 hPa | 28.2 C deg | 45.6 % | 49 - | 0 C deg |
| 1790607573 | 992.8 hPa | 28 C deg | 46.1 % | 45 - | 0 C deg |
| 1790605751 | 992.9 hPa | 27.4 C deg | 47.7 % | 42 - | 0 C deg |
| 1790603900 | 993 hPa | 27.1 C deg | 48.9 % | 37 - | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
eGAS: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)