This is the latest recevied telemetry packets stored in our database for station/object VE3DLH-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | CPM* | uSvh* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274600 | 15 cpm | 0.12 uSv/h | 0 | 0 | 0 |
| 1836274394 | 14 cpm | 0.11 uSv/h | 0 | 0 | 0 |
| 1836274350 | 19 cpm | 0.15 uSv/h | 0 | 0 | 0 |
| 1836274123 | 16 cpm | 0.12 uSv/h | 0 | 0 | 0 |
| 1836274075 | 19 cpm | 0.15 uSv/h | 0 | 0 | 0 |
| 1778040035 | 19 cpm | 0.15 uSv/h | 0 | 0 | 0 |
| 1778039758 | 22 cpm | 0.17 uSv/h | 0 | 0 | 0 |
| 1778039501 | 29 cpm | 0.23 uSv/h | 0 | 0 | 0 |
| 1778039201 | 19 cpm | 0.15 uSv/h | 0 | 0 | 0 |
| 1778038910 | 18 cpm | 0.14 uSv/h | 0 | 0 | 0 |
| 1778038646 | 27 cpm | 0.21 uSv/h | 0 | 0 | 0 |
| 1778038361 | 29 cpm | 0.23 uSv/h | 0 | 0 | 0 |
| 1778038066 | 19 cpm | 0.15 uSv/h | 0 | 0 | 0 |
| 1778037806 | 9 cpm | 0.07 uSv/h | 0 | 0 | 0 |
| 1778037556 | 10 cpm | 0.08 uSv/h | 0 | 0 | 0 |
| 1778037296 | 31 cpm | 0.25 uSv/h | 0 | 0 | 0 |
| 1778037030 | 26 cpm | 0.21 uSv/h | 0 | 0 | 0 |
| 1778036741 | 17 cpm | 0.13 uSv/h | 0 | 0 | 0 |
| 1778036492 | 23 cpm | 0.18 uSv/h | 0 | 0 | 0 |
| 1778036250 | 17 cpm | 0.13 uSv/h | 0 | 0 | 0 |
| 1778035989 | 23 cpm | 0.18 uSv/h | 0 | 0 | 0 |
| 1778035710 | 16 cpm | 0.12 uSv/h | 0 | 0 | 0 |
| 1778035410 | 18 cpm | 0.14 uSv/h | 0 | 0 | 0 |
| 1778035143 | 20 cpm | 0.16 uSv/h | 0 | 0 | 0 |
| 1778034886 | 20 cpm | 0.16 uSv/h | 0 | 0 | 0 |
*Used Equation Coefficients:
CPM: 0, 1, 0
uSvh: 0, 0.01, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)