APRS Track Direct

My position About ☰

reset

LU8SAM Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LU8SAM. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1752846717	24 Pkt	0 Pkt	-29 dBm	1.6 V
1752846094	22 Pkt	0 Pkt	-31 dBm	1.58 V
1752845471	12 Pkt	0 Pkt	-29 dBm	1.74 V
1752844848	36 Pkt	0 Pkt	-29 dBm	1.6 V
1752844225	19 Pkt	0 Pkt	-28 dBm	1.56 V
1752843603	9 Pkt	0 Pkt	-29 dBm	1.56 V
1752842981	19 Pkt	0 Pkt	-28 dBm	1.52 V
1752842358	18 Pkt	0 Pkt	-30 dBm	1.42 V
1752841735	25 Pkt	0 Pkt	-29 dBm	1.6 V
1752841112	23 Pkt	0 Pkt	-28 dBm	1.56 V
1752840489	24 Pkt	0 Pkt	-31 dBm	1.54 V
1752839865	11 Pkt	0 Pkt	-28 dBm	1.52 V
1752839243	32 Pkt	1 Pkt	-31 dBm	1.56 V
1752838620	19 Pkt	0 Pkt	-30 dBm	1.58 V
1752837997	15 Pkt	0 Pkt	-30 dBm	1.58 V
1752837375	13 Pkt	1 Pkt	-30 dBm	1.5 V
1752836752	18 Pkt	0 Pkt	-29 dBm	1.52 V
1752836130	37 Pkt	0 Pkt	-32 dBm	1.37 V
1752835507	14 Pkt	0 Pkt	-31 dBm	1.39 V
1752834885	23 Pkt	0 Pkt	-29 dBm	1.48 V
1752834261	25 Pkt	0 Pkt	-28 dBm	1.58 V
1752833638	12 Pkt	0 Pkt	-28 dBm	1.58 V
1752833016	33 Pkt	0 Pkt	-31 dBm	1.76 V
1752832393	21 Pkt	1 Pkt	-29 dBm	1.48 V
1752831770	14 Pkt	0 Pkt	-31 dBm	1.27 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)