This is the latest recevied telemetry packets stored in our database for station/object VCAPK. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Vin* | Rx1h* | DgS1h* | Eff1h* | A5* |
---|---|---|---|---|---|
1718714406 | 14.1 Volt | 990 Pkt | 2.62 Pcnt | 76 Pcnt | 0 None |
1718714106 | 14.1 Volt | 980 Pkt | 2.57 Pcnt | 76 Pcnt | 0 None |
1718713806 | 14.1 Volt | 970 Pkt | 2.44 Pcnt | 76 Pcnt | 0 None |
1718713506 | 14.1 Volt | 940 Pkt | 2.65 Pcnt | 76 Pcnt | 0 None |
1718713206 | 14.1 Volt | 940 Pkt | 2.66 Pcnt | 76 Pcnt | 0 None |
1718712930 | 14.1 Volt | 900 Pkt | 2.85 Pcnt | 75 Pcnt | 0 None |
1718712906 | 14.1 Volt | 900 Pkt | 2.85 Pcnt | 75 Pcnt | 0 None |
1718712607 | 14.1 Volt | 910 Pkt | 2.81 Pcnt | 75 Pcnt | 0 None |
1718712306 | 14.1 Volt | 930 Pkt | 2.84 Pcnt | 75 Pcnt | 0 None |
1718712006 | 14.1 Volt | 920 Pkt | 2.78 Pcnt | 75 Pcnt | 0 None |
1718711706 | 14.1 Volt | 920 Pkt | 3 Pcnt | 74 Pcnt | 0 None |
1718711406 | 14.1 Volt | 930 Pkt | 2.74 Pcnt | 75 Pcnt | 0 None |
1718711106 | 13.95 Volt | 920 Pkt | 2.74 Pcnt | 74 Pcnt | 0 None |
1718710806 | 14.1 Volt | 930 Pkt | 2.63 Pcnt | 74 Pcnt | 0 None |
1718710506 | 14.1 Volt | 930 Pkt | 2.96 Pcnt | 74 Pcnt | 0 None |
1718710206 | 14.1 Volt | 950 Pkt | 2.81 Pcnt | 74 Pcnt | 0 None |
1718709906 | 14.1 Volt | 930 Pkt | 2.87 Pcnt | 74 Pcnt | 0 None |
1718709606 | 14.1 Volt | 950 Pkt | 2.66 Pcnt | 74 Pcnt | 0 None |
1718709307 | 14.1 Volt | 950 Pkt | 2.74 Pcnt | 74 Pcnt | 0 None |
1718709306 | 14.1 Volt | 950 Pkt | 2.74 Pcnt | 74 Pcnt | 0 None |
1718709007 | 14.1 Volt | 960 Pkt | 2.64 Pcnt | 74 Pcnt | 0 None |
1718708706 | 14.1 Volt | 950 Pkt | 2.76 Pcnt | 75 Pcnt | 0 None |
1718708407 | 14.1 Volt | 960 Pkt | 2.73 Pcnt | 75 Pcnt | 0 None |
1718708107 | 14.1 Volt | 940 Pkt | 2.89 Pcnt | 75 Pcnt | 0 None |
1718707807 | 14.1 Volt | 940 Pkt | 2.94 Pcnt | 75 Pcnt | 0 None |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
DgS1h: 0, 0.001, 0
Eff1h: 0, 1, 0
A5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)