This is the latest recevied telemetry packets stored in our database for station/object DF5KX-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1770089467 | -3.7 deg C | 52.5 % | 0 | 0 | 0 |
| 1770088559 | -3.5 deg C | 52.1 % | 0 | 0 | 0 |
| 1770087654 | -3.3 deg C | 51.8 % | 0 | 0 | 0 |
| 1770086750 | -3.1 deg C | 51.5 % | 0 | 0 | 0 |
| 1770085850 | -2.8 deg C | 51 % | 0 | 0 | 0 |
| 1770084951 | -2.5 deg C | 50.7 % | 0 | 0 | 0 |
| 1770084052 | -2.2 deg C | 50.4 % | 0 | 0 | 0 |
| 1770083151 | -1.9 deg C | 50 % | 0 | 0 | 0 |
| 1770082251 | -1.6 deg C | 49.6 % | 0 | 0 | 0 |
| 1770081355 | -1.1 deg C | 49.2 % | 0 | 0 | 0 |
| 1770080454 | -0.6 deg C | 48.8 % | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)