This is the latest recevied telemetry packets stored in our database for station/object DK8AF-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1749382888 | 27 deg C | 44.9 % | 0 | 0 | 0 |
| 1749381988 | 27 deg C | 44.4 % | 0 | 0 | 0 |
| 1749381088 | 27.1 deg C | 44.8 % | 0 | 0 | 0 |
| 1749380187 | 27.2 deg C | 45 % | 0 | 0 | 0 |
| 1749379287 | 27.2 deg C | 45.2 % | 0 | 0 | 0 |
| 1749378387 | 27.3 deg C | 45.3 % | 0 | 0 | 0 |
| 1749377487 | 27.5 deg C | 45 % | 0 | 0 | 0 |
| 1749376587 | 27.9 deg C | 44.1 % | 0 | 0 | 0 |
| 1749375687 | 28.6 deg C | 42.8 % | 0 | 0 | 0 |
| 1749375358 | 29.1 deg C | 42.1 % | 0 | 0 | 0 |
| 1749374458 | 27.8 deg C | 45.2 % | 0 | 0 | 0 |
| 1749373558 | 27.8 deg C | 45.3 % | 0 | 0 | 0 |
| 1749372657 | 27.8 deg C | 45.2 % | 0 | 0 | 0 |
| 1749371758 | 27.8 deg C | 45.1 % | 0 | 0 | 0 |
| 1749370857 | 27.8 deg C | 44.9 % | 0 | 0 | 0 |
| 1749369957 | 27.8 deg C | 44.8 % | 0 | 0 | 0 |
| 1749369057 | 27.7 deg C | 45.2 % | 0 | 0 | 0 |
| 1749368157 | 27.8 deg C | 44.8 % | 0 | 0 | 0 |
| 1749367257 | 27.6 deg C | 45.1 % | 0 | 0 | 0 |
| 1749366357 | 27.7 deg C | 45.2 % | 0 | 0 | 0 |
| 1749365457 | 27.8 deg C | 45.6 % | 0 | 0 | 0 |
| 1749364557 | 27.8 deg C | 45.9 % | 0 | 0 | 0 |
| 1749363657 | 27.8 deg C | 46.2 % | 0 | 0 | 0 |
| 1749363326 | 27.8 deg C | 46.1 % | 0 | 0 | 0 |
| 1749362425 | 27.8 deg C | 46.2 % | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)