APRS Track Direct

My position About ☰

reset

W9II-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W9II-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1790640812	14.4 Volt	10 Pkt	0 Pkt	13 Pcnt	90.5 F
1790640812	14.4 Volt	10 Pkt	0 Pkt	13 Pcnt	90.5 F
1790640512	14.55 Volt	10 Pkt	0 Pkt	14 Pcnt	90.5 F
1790640213	14.7 Volt	10 Pkt	0 Pkt	13 Pcnt	90.5 F
1790640212	14.7 Volt	10 Pkt	0 Pkt	13 Pcnt	90.5 F
1790639912	14.85 Volt	0 Pkt	0 Pkt	11 Pcnt	90.5 F
1790639612	14.93 Volt	10 Pkt	0 Pkt	11 Pcnt	90.5 F
1790639612	14.93 Volt	10 Pkt	0 Pkt	11 Pcnt	90.5 F
1790639312	14.7 Volt	10 Pkt	0 Pkt	11 Pcnt	90.5 F
1790639012	14.55 Volt	10 Pkt	0 Pkt	14 Pcnt	90.5 F
1790639012	14.55 Volt	10 Pkt	0 Pkt	14 Pcnt	90.5 F
1790638712	14.7 Volt	10 Pkt	0 Pkt	19 Pcnt	90.5 F
1790638412	14.78 Volt	10 Pkt	0 Pkt	19 Pcnt	90.5 F
1790638412	14.78 Volt	10 Pkt	0 Pkt	19 Pcnt	90.5 F
1790638114	15 Volt	20 Pkt	10 Pkt	20 Pcnt	91.4 F
1790637812	14.78 Volt	20 Pkt	10 Pkt	23 Pcnt	90.5 F
1790637812	14.78 Volt	20 Pkt	10 Pkt	23 Pcnt	90.5 F
1790637512	14.63 Volt	20 Pkt	10 Pkt	24 Pcnt	90.5 F
1790637212	14.85 Volt	30 Pkt	10 Pkt	30 Pcnt	89.6 F
1790637212	14.85 Volt	30 Pkt	10 Pkt	30 Pcnt	89.6 F
1790636912	14.93 Volt	40 Pkt	10 Pkt	32 Pcnt	89.6 F
1790636612	14.55 Volt	40 Pkt	10 Pkt	32 Pcnt	89.6 F
1790636612	14.55 Volt	40 Pkt	10 Pkt	32 Pcnt	89.6 F
1790636312	14.48 Volt	50 Pkt	10 Pkt	36 Pcnt	90.5 F
1790636012	14.85 Volt	50 Pkt	20 Pkt	38 Pcnt	90.5 F

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.9, -83.2

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)