APRS Track Direct

My position About ☰

reset

DG8NGN Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DG8NGN. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RX Avg 10m*	TX Avg 10m*	RX Count 10m*	TX Count 10m*
1751195460	0 erlang	0 erlang	0 receptions	0 transmissions
1751194860	0 erlang	0.04 erlang	0 receptions	2 transmissions
1751194260	0.05 erlang	0.18 erlang	10 receptions	28 transmissions
1751193660	0 erlang	0.05 erlang	0 receptions	15 transmissions
1751193060	0 erlang	0.02 erlang	0 receptions	5 transmissions
1751192460	0.23 erlang	0.42 erlang	8 receptions	19 transmissions
1751191860	0.2 erlang	0.69 erlang	11 receptions	27 transmissions
1751191260	0.12 erlang	0.74 erlang	7 receptions	31 transmissions
1751190660	0 erlang	0.74 erlang	0 receptions	22 transmissions
1751190060	0 erlang	0.02 erlang	0 receptions	5 transmissions
1751189460	0 erlang	0 erlang	0 receptions	0 transmissions
1751188860	0 erlang	0 erlang	0 receptions	0 transmissions
1751188260	0 erlang	0 erlang	0 receptions	0 transmissions
1751187660	0 erlang	0.05 erlang	0 receptions	6 transmissions
1751187060	0 erlang	0.09 erlang	0 receptions	5 transmissions
1751186460	0 erlang	0.01 erlang	0 receptions	3 transmissions
1751185860	0 erlang	0.01 erlang	0 receptions	3 transmissions
1751185260	0 erlang	0.03 erlang	0 receptions	7 transmissions
1751184660	0 erlang	0.07 erlang	0 receptions	25 transmissions
1751184060	0 erlang	0.02 erlang	0 receptions	6 transmissions
1751183460	0 erlang	0.05 erlang	0 receptions	18 transmissions
1751182860	0 erlang	0.04 erlang	0 receptions	10 transmissions
1751182260	0 erlang	0.02 erlang	0 receptions	6 transmissions
1751181660	0 erlang	0.01 erlang	0 receptions	3 transmissions
1751181060	0 erlang	0.11 erlang	0 receptions	14 transmissions

*Used Equation Coefficients:

RX Avg 10m: 0, 0.00392, 0

TX Avg 10m: 0, 0.00392, 0

RX Count 10m: 0, 1, 0

TX Count 10m: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)