This is the latest recevied telemetry packets stored in our database for station/object ER-IR5K. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1794912141 | 1 | 115 | 3 | 9 | 0 |
| 1794911541 | 1 | 111 | 1 | 7 | 0 |
| 1794910941 | 90 | 161 | 9 | 9 | 0 |
| 1794910341 | 0 | 29 | 0 | 2 | 0 |
| 1794909741 | 0 | 773 | 1 | 13 | 0 |
| 1794909141 | 10 | 386 | 4 | 20 | 0 |
| 1794908541 | 2 | 55 | 2 | 5 | 0 |
| 1794907941 | 2 | 103 | 3 | 13 | 0 |
| 1794907341 | 0 | 60 | 0 | 5 | 0 |
| 1794906741 | 0 | 72 | 0 | 8 | 0 |
| 1794906141 | 0 | 67 | 0 | 6 | 0 |
| 1794905541 | 0 | 43 | 0 | 4 | 0 |
| 1794904941 | 0 | 62 | 0 | 6 | 0 |
| 1794904341 | 0 | 47 | 0 | 4 | 0 |
| 1794903741 | 0 | 9 | 0 | 1 | 0 |
| 1794903141 | 0 | 94 | 0 | 11 | 0 |
| 1794902541 | 1 | 153 | 2 | 13 | 0 |
| 1794901941 | 18 | 91 | 6 | 7 | 0 |
| 1794901341 | 0 | 60 | 0 | 6 | 0 |
| 1794900741 | 1 | 38 | 2 | 3 | 0 |
| 1794900141 | 0 | 33 | 1 | 4 | 0 |
| 1794899541 | 0 | 89 | 0 | 8 | 0 |
| 1794898941 | 0 | 20 | 0 | 1 | 0 |
| 1794898341 | 0 | 46 | 0 | 4 | 0 |
| 1794897741 | 0 | 46 | 0 | 4 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)