This is the latest recevied telemetry packets stored in our database for station/object ER-IR0ZZN. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1794913122 | 1 | 42 | 3 | 7 | 0 |
| 1794912522 | 0 | 58 | 0 | 6 | 0 |
| 1794911922 | 0 | 91 | 1 | 7 | 0 |
| 1794911322 | 0 | 111 | 0 | 5 | 0 |
| 1794910722 | 0 | 61 | 1 | 5 | 0 |
| 1794908922 | 0 | 183 | 0 | 10 | 0 |
| 1794908322 | 0 | 20 | 0 | 3 | 0 |
| 1794907722 | 29 | 138 | 6 | 10 | 0 |
| 1794907122 | 0 | 16 | 0 | 1 | 0 |
| 1794906522 | 273 | 376 | 7 | 13 | 0 |
| 1794905923 | 357 | 486 | 10 | 12 | 0 |
| 1794905322 | 2 | 54 | 4 | 6 | 0 |
| 1794904722 | 0 | 68 | 0 | 6 | 0 |
| 1794904122 | 9 | 48 | 2 | 3 | 0 |
| 1794903522 | 1 | 59 | 2 | 7 | 0 |
| 1794902922 | 18 | 162 | 6 | 14 | 0 |
| 1794902322 | 0 | 148 | 0 | 15 | 0 |
| 1794901722 | 0 | 35 | 0 | 2 | 0 |
| 1794901122 | 0 | 60 | 1 | 6 | 0 |
| 1794900522 | 1 | 28 | 1 | 2 | 0 |
| 1794899922 | 0 | 54 | 0 | 3 | 0 |
| 1794899322 | 2 | 94 | 2 | 8 | 0 |
| 1794898722 | 9 | 75 | 5 | 7 | 0 |
| 1794898122 | 0 | 43 | 0 | 4 | 0 |
| 1794897522 | 0 | 44 | 1 | 4 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)