APRS Track Direct

My position About ☰

reset

EA3ICF-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EA3ICF-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	DgR*	Eff*
1790640503	1 Pkt	10 Pkt	0 Pkt	51.27 Pcnt	48 Pcnt
1790640203	2 Pkt	0 Pkt	1 Pkt	51.59 Pcnt	48 Pcnt
1790639903	1 Pkt	0 Pkt	1 Pkt	51.59 Pcnt	48 Pcnt
1790639603	2 Pkt	0 Pkt	0 Pkt	51.61 Pcnt	48 Pcnt
1790639303	3 Pkt	0 Pkt	1 Pkt	51.61 Pcnt	48 Pcnt
1790639003	2 Pkt	0 Pkt	1 Pkt	52.29 Pcnt	48 Pcnt
1790638703	1 Pkt	0 Pkt	0 Pkt	51.97 Pcnt	48 Pcnt
1790638404	1 Pkt	0 Pkt	1 Pkt	52.32 Pcnt	48 Pcnt
1790638104	2 Pkt	0 Pkt	1 Pkt	52.32 Pcnt	48 Pcnt
1790637803	1 Pkt	0 Pkt	0 Pkt	52 Pcnt	48 Pcnt
1790637503	1 Pkt	0 Pkt	1 Pkt	52.35 Pcnt	48 Pcnt
1790637204	1 Pkt	0 Pkt	1 Pkt	52.35 Pcnt	48 Pcnt
1790636903	0 Pkt	0 Pkt	0 Pkt	52.03 Pcnt	48 Pcnt
1790636603	1 Pkt	0 Pkt	1 Pkt	52.03 Pcnt	48 Pcnt
1790636304	1 Pkt	0 Pkt	1 Pkt	52.03 Pcnt	48 Pcnt
1790636004	0 Pkt	0 Pkt	0 Pkt	51.7 Pcnt	48 Pcnt
1790635703	1 Pkt	0 Pkt	1 Pkt	51.7 Pcnt	48 Pcnt
1790635404	1 Pkt	0 Pkt	1 Pkt	51.7 Pcnt	48 Pcnt
1790635104	0 Pkt	0 Pkt	0 Pkt	51.37 Pcnt	47 Pcnt
1790634804	1 Pkt	0 Pkt	1 Pkt	51.37 Pcnt	47 Pcnt
1790634504	1 Pkt	0 Pkt	1 Pkt	51.37 Pcnt	47 Pcnt
1790634204	0 Pkt	0 Pkt	0 Pkt	51.03 Pcnt	47 Pcnt
1790633904	1 Pkt	0 Pkt	1 Pkt	51.03 Pcnt	47 Pcnt
1790633604	1 Pkt	0 Pkt	1 Pkt	51.03 Pcnt	47 Pcnt
1790633304	0 Pkt	0 Pkt	0 Pkt	50.69 Pcnt	47 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)