APRS Track Direct

My position About ☰

reset

DH8TOM-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DH8TOM-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RX10m*	RX1h*	Eff1h*	Temp*
1754442961	19 Pkt	340 Pkt	100 Pcnt	17.28 Grad
1754442660	18 Pkt	240 Pkt	100 Pcnt	17.28 Grad
1754442360	18 Pkt	220 Pkt	100 Pcnt	17.28 Grad
1754442060	19 Pkt	250 Pkt	100 Pcnt	17.28 Grad
1754441760	19 Pkt	350 Pkt	100 Pcnt	17.28 Grad
1754441459	19 Pkt	380 Pkt	100 Pcnt	17.28 Grad
1754441159	19 Pkt	270 Pkt	100 Pcnt	17.28 Grad
1754440859	19 Pkt	370 Pkt	100 Pcnt	17.28 Grad
1754440558	19 Pkt	430 Pkt	99 Pcnt	17.28 Grad
1754440258	18 Pkt	270 Pkt	98 Pcnt	17.28 Grad
1754439958	18 Pkt	290 Pkt	98 Pcnt	17.28 Grad
1754439657	18 Pkt	340 Pkt	98 Pcnt	17.28 Grad
1754439357	19 Pkt	290 Pkt	98 Pcnt	17.28 Grad
1754439057	19 Pkt	320 Pkt	98 Pcnt	17.28 Grad
1754438756	19 Pkt	300 Pkt	98 Pcnt	17.28 Grad
1754438456	18 Pkt	290 Pkt	98 Pcnt	17.28 Grad
1754438156	18 Pkt	360 Pkt	98 Pcnt	17.28 Grad
1754437856	19 Pkt	310 Pkt	98 Pcnt	17.28 Grad
1754437555	19 Pkt	280 Pkt	98 Pcnt	17.28 Grad
1754437255	20 Pkt	360 Pkt	99 Pcnt	17.28 Grad
1754436955	20 Pkt	360 Pkt	99 Pcnt	17.28 Grad
1754436654	20 Pkt	270 Pkt	100 Pcnt	17.28 Grad
1754436355	20 Pkt	330 Pkt	100 Pcnt	17.28 Grad
1754436054	20 Pkt	360 Pkt	100 Pcnt	17.28 Grad
1754435754	19 Pkt	290 Pkt	100 Pcnt	17.28 Grad

*Used Equation Coefficients:

RX10m: 0, 1, 0

RX1h: 0, 10, 0

Eff1h: 0, 1, 0

Vin: 0, 0.101, 0

Temp: 0, 0.135, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)