APRS Track Direct

My position About ☰

reset

VO2AGO Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VO2AGO. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Battery*	LiPo*	IndoorTemp*	FreezerTemp*	BatteryTemp*
1745130865	14.45 V	11.1 V	21.8 C	19.9 C	50 C
1745130415	14.48 V	11.1 V	21.7 C	19.8 C	50 C
1745129966	14.48 V	11.1 V	21.7 C	19.7 C	50 C
1745129515	14.45 V	11.1 V	21.8 C	19.6 C	50 C
1745129065	14.49 V	11.1 V	21.9 C	19.5 C	50 C
1745128616	14.48 V	11.1 V	21.9 C	19.4 C	50 C
1745128166	14.48 V	11.1 V	22 C	19.2 C	50 C
1745127715	14.52 V	11.1 V	22.1 C	19.2 C	50 C
1745127265	14.47 V	11.1 V	22.2 C	19.1 C	50 C
1745126816	14.48 V	11.1 V	22.2 C	18.9 C	50 C
1745126365	14.48 V	11.1 V	22.3 C	18.8 C	50 C
1745125915	14.5 V	11.1 V	22.4 C	18.7 C	50 C
1745125465	14.47 V	11.1 V	22.4 C	18.6 C	50 C
1745125015	14.48 V	11.1 V	22.5 C	18.4 C	50 C
1745124565	14.44 V	11.1 V	22.5 C	18.3 C	50 C
1745124116	14.45 V	11.1 V	22.5 C	18.2 C	50 C
1745123666	14.48 V	11.1 V	22.6 C	18.1 C	50 C
1745123215	14.46 V	11.1 V	22.6 C	17.9 C	50 C
1745122766	14.47 V	11.1 V	22.5 C	17.8 C	50 C
1745122316	14.46 V	11.1 V	22.5 C	17.7 C	50 C
1745121865	14.46 V	11.1 V	22.5 C	17.6 C	50 C
1745121415	14.44 V	11.1 V	22.4 C	17.4 C	50 C
1745120965	14.5 V	11.1 V	22.4 C	17.2 C	50 C
1745120515	14.49 V	11.1 V	22.4 C	17.1 C	50 C
1745120065	14.5 V	11.1 V	22.2 C	17 C	50 C

*Used Equation Coefficients:

Battery: 0, 0.01, 0

LiPo: 0, 0.01, 0

IndoorTemp: 0, 0.01, -50

FreezerTemp: 0, 0.01, -50

BatteryTemp: 0, 0.1, -50

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)